/* * tclIOUtil.c -- * * This file contains the implementation of Tcl's generic filesystem * code, which supports a pluggable filesystem architecture allowing both * platform specific filesystems and 'virtual filesystems'. All * filesystem access should go through the functions defined in this * file. Most of this code was contributed by Vince Darley. * * Parts of this file are based on code contributed by Karl Lehenbauer, * Mark Diekhans and Peter da Silva. * * Copyright (c) 1991-1994 The Regents of the University of California. * Copyright (c) 1994-1997 Sun Microsystems, Inc. * Copyright (c) 2001-2004 Vincent Darley. * * See the file "license.terms" for information on usage and redistribution of * this file, and for a DISCLAIMER OF ALL WARRANTIES. * * RCS: @(#) $Id: tclIOUtil.c,v 1.151.2.3 2010/09/06 12:57:33 stwo Exp $ */ #include "tclInt.h" #ifdef __WIN32__ # include "tclWinInt.h" #endif #include "tclFileSystem.h" /* * Prototypes for functions defined later in this file. */ static FilesystemRecord*FsGetFirstFilesystem(void); static void FsThrExitProc(ClientData cd); static Tcl_Obj * FsListMounts(Tcl_Obj *pathPtr, const char *pattern); static void FsAddMountsToGlobResult(Tcl_Obj *resultPtr, Tcl_Obj *pathPtr, const char *pattern, Tcl_GlobTypeData *types); static void FsUpdateCwd(Tcl_Obj *cwdObj, ClientData clientData); #ifdef TCL_THREADS static void FsRecacheFilesystemList(void); #endif /* * These form part of the native filesystem support. They are needed here * because we have a few native filesystem functions (which are the same for * win/unix) in this file. There is no need to place them in tclInt.h, because * they are not (and should not be) used anywhere else. */ MODULE_SCOPE const char * tclpFileAttrStrings[]; MODULE_SCOPE const TclFileAttrProcs tclpFileAttrProcs[]; /* * The following functions are obsolete string based APIs, and should be * removed in a future release (Tcl 9 would be a good time). */ /* Obsolete */ int Tcl_Stat( const char *path, /* Path of file to stat (in current CP). */ struct stat *oldStyleBuf) /* Filled with results of stat call. */ { int ret; Tcl_StatBuf buf; Tcl_Obj *pathPtr = Tcl_NewStringObj(path, -1); Tcl_IncrRefCount(pathPtr); ret = Tcl_FSStat(pathPtr, &buf); Tcl_DecrRefCount(pathPtr); if (ret != -1) { #ifndef TCL_WIDE_INT_IS_LONG Tcl_WideInt tmp1, tmp2, tmp3 = 0; # define OUT_OF_RANGE(x) \ (((Tcl_WideInt)(x)) < Tcl_LongAsWide(LONG_MIN) || \ ((Tcl_WideInt)(x)) > Tcl_LongAsWide(LONG_MAX)) # define OUT_OF_URANGE(x) \ (((Tcl_WideUInt)(x)) > ((Tcl_WideUInt)ULONG_MAX)) /* * Perform the result-buffer overflow check manually. * * Note that ino_t/ino64_t is unsigned... * * Workaround gcc warning of "comparison is always false due to * limited range of data type" by assigning to tmp var of type * Tcl_WideInt. */ tmp1 = (Tcl_WideInt) buf.st_ino; tmp2 = (Tcl_WideInt) buf.st_size; #ifdef HAVE_STRUCT_STAT_ST_BLOCKS tmp3 = (Tcl_WideInt) buf.st_blocks; #endif if (OUT_OF_URANGE(tmp1) || OUT_OF_RANGE(tmp2) || OUT_OF_RANGE(tmp3)) { #if defined(EFBIG) errno = EFBIG; #elif defined(EOVERFLOW) errno = EOVERFLOW; #else #error "What status should be returned for file size out of range?" #endif return -1; } # undef OUT_OF_RANGE # undef OUT_OF_URANGE #endif /* !TCL_WIDE_INT_IS_LONG */ /* * Copy across all supported fields, with possible type coercions on * those fields that change between the normal and lf64 versions of * the stat structure (on Solaris at least). This is slow when the * structure sizes coincide, but that's what you get for using an * obsolete interface. */ oldStyleBuf->st_mode = buf.st_mode; oldStyleBuf->st_ino = (ino_t) buf.st_ino; oldStyleBuf->st_dev = buf.st_dev; #ifdef HAVE_STRUCT_STAT_ST_RDEV oldStyleBuf->st_rdev = buf.st_rdev; #endif oldStyleBuf->st_nlink = buf.st_nlink; oldStyleBuf->st_uid = buf.st_uid; oldStyleBuf->st_gid = buf.st_gid; oldStyleBuf->st_size = (off_t) buf.st_size; oldStyleBuf->st_atime = buf.st_atime; oldStyleBuf->st_mtime = buf.st_mtime; oldStyleBuf->st_ctime = buf.st_ctime; #ifdef HAVE_STRUCT_STAT_ST_BLKSIZE oldStyleBuf->st_blksize = buf.st_blksize; #endif #ifdef HAVE_STRUCT_STAT_ST_BLOCKS #ifdef HAVE_BLKCNT_T oldStyleBuf->st_blocks = (blkcnt_t) buf.st_blocks; #else oldStyleBuf->st_blocks = (unsigned long) buf.st_blocks; #endif #endif } return ret; } /* Obsolete */ int Tcl_Access( const char *path, /* Path of file to access (in current CP). */ int mode) /* Permission setting. */ { int ret; Tcl_Obj *pathPtr = Tcl_NewStringObj(path,-1); Tcl_IncrRefCount(pathPtr); ret = Tcl_FSAccess(pathPtr,mode); Tcl_DecrRefCount(pathPtr); return ret; } /* Obsolete */ Tcl_Channel Tcl_OpenFileChannel( Tcl_Interp *interp, /* Interpreter for error reporting; can be * NULL. */ const char *path, /* Name of file to open. */ const char *modeString, /* A list of POSIX open modes or a string such * as "rw". */ int permissions) /* If the open involves creating a file, with * what modes to create it? */ { Tcl_Channel ret; Tcl_Obj *pathPtr = Tcl_NewStringObj(path,-1); Tcl_IncrRefCount(pathPtr); ret = Tcl_FSOpenFileChannel(interp, pathPtr, modeString, permissions); Tcl_DecrRefCount(pathPtr); return ret; } /* Obsolete */ int Tcl_Chdir( const char *dirName) { int ret; Tcl_Obj *pathPtr = Tcl_NewStringObj(dirName,-1); Tcl_IncrRefCount(pathPtr); ret = Tcl_FSChdir(pathPtr); Tcl_DecrRefCount(pathPtr); return ret; } /* Obsolete */ char * Tcl_GetCwd( Tcl_Interp *interp, Tcl_DString *cwdPtr) { Tcl_Obj *cwd; cwd = Tcl_FSGetCwd(interp); if (cwd == NULL) { return NULL; } else { Tcl_DStringInit(cwdPtr); Tcl_DStringAppend(cwdPtr, Tcl_GetString(cwd), -1); Tcl_DecrRefCount(cwd); return Tcl_DStringValue(cwdPtr); } } /* Obsolete */ int Tcl_EvalFile( Tcl_Interp *interp, /* Interpreter in which to process file. */ const char *fileName) /* Name of file to process. Tilde-substitution * will be performed on this name. */ { int ret; Tcl_Obj *pathPtr = Tcl_NewStringObj(fileName,-1); Tcl_IncrRefCount(pathPtr); ret = Tcl_FSEvalFile(interp, pathPtr); Tcl_DecrRefCount(pathPtr); return ret; } /* * The 3 hooks for Stat, Access and OpenFileChannel are obsolete. The * complete, general hooked filesystem APIs should be used instead. This * define decides whether to include the obsolete hooks and related code. If * these are removed, we'll also want to remove them from stubs/tclInt. The * only known users of these APIs are prowrap and mktclapp. New * code/extensions should not use them, since they do not provide as full * support as the full filesystem API. * * As soon as prowrap and mktclapp are updated to use the full filesystem * support, I suggest all these hooks are removed. */ #undef USE_OBSOLETE_FS_HOOKS #ifdef USE_OBSOLETE_FS_HOOKS /* * The following typedef declarations allow for hooking into the chain of * functions maintained for 'Tcl_Stat(...)', 'Tcl_Access(...)' & * 'Tcl_OpenFileChannel(...)'. Basically for each hookable function a linked * list is defined. */ typedef struct StatProc { TclStatProc_ *proc; /* Function to process a 'stat()' call */ struct StatProc *nextPtr; /* The next 'stat()' function to call */ } StatProc; typedef struct AccessProc { TclAccessProc_ *proc; /* Function to process a 'access()' call */ struct AccessProc *nextPtr; /* The next 'access()' function to call */ } AccessProc; typedef struct OpenFileChannelProc { TclOpenFileChannelProc_ *proc; /* Function to process a * 'Tcl_OpenFileChannel()' call */ struct OpenFileChannelProc *nextPtr; /* The next 'Tcl_OpenFileChannel()' function * to call */ } OpenFileChannelProc; /* * For each type of (obsolete) hookable function, a static node is declared to * hold the function pointer for the "built-in" routine (e.g. 'TclpStat(...)') * and the respective list is initialized as a pointer to that node. * * The "delete" functions (e.g. 'TclStatDeleteProc(...)') ensure that these * statically declared list entry cannot be inadvertently removed. * * This method avoids the need to call any sort of "initialization" function. * * All three lists are protected by a global obsoleteFsHookMutex. */ static StatProc *statProcList = NULL; static AccessProc *accessProcList = NULL; static OpenFileChannelProc *openFileChannelProcList = NULL; TCL_DECLARE_MUTEX(obsoleteFsHookMutex) #endif /* USE_OBSOLETE_FS_HOOKS */ /* * Declare the native filesystem support. These functions should be considered * private to Tcl, and should really not be called directly by any code other * than this file (i.e. neither by Tcl's core nor by extensions). Similarly, * the old string-based Tclp... native filesystem functions should not be * called. * * The correct API to use now is the Tcl_FS... set of functions, which ensure * correct and complete virtual filesystem support. * * We cannot make all of these static, since some of them are implemented in * the platform-specific directories. */ static Tcl_FSFilesystemSeparatorProc NativeFilesystemSeparator; static Tcl_FSFreeInternalRepProc NativeFreeInternalRep; static Tcl_FSFileAttrStringsProc NativeFileAttrStrings; static Tcl_FSFileAttrsGetProc NativeFileAttrsGet; static Tcl_FSFileAttrsSetProc NativeFileAttrsSet; /* * The only reason these functions are not static is that they are either * called by code in the native (win/unix) directories or they are actually * implemented in those directories. They should simply not be called by code * outside Tcl's native filesystem core i.e. they should be considered * 'static' to Tcl's filesystem code (if we ever built the native filesystem * support into a separate code library, this could actually be enforced). */ Tcl_FSFilesystemPathTypeProc TclpFilesystemPathType; Tcl_FSInternalToNormalizedProc TclpNativeToNormalized; Tcl_FSStatProc TclpObjStat; Tcl_FSAccessProc TclpObjAccess; Tcl_FSMatchInDirectoryProc TclpMatchInDirectory; Tcl_FSChdirProc TclpObjChdir; Tcl_FSLstatProc TclpObjLstat; Tcl_FSCopyFileProc TclpObjCopyFile; Tcl_FSDeleteFileProc TclpObjDeleteFile; Tcl_FSRenameFileProc TclpObjRenameFile; Tcl_FSCreateDirectoryProc TclpObjCreateDirectory; Tcl_FSCopyDirectoryProc TclpObjCopyDirectory; Tcl_FSRemoveDirectoryProc TclpObjRemoveDirectory; Tcl_FSUnloadFileProc TclpUnloadFile; Tcl_FSLinkProc TclpObjLink; Tcl_FSListVolumesProc TclpObjListVolumes; /* * Define the native filesystem dispatch table. If necessary, it is ok to make * this non-static, but it should only be accessed by the functions actually * listed within it (or perhaps other helper functions of them). Anything * which is not part of this 'native filesystem implementation' should not be * delving inside here! */ Tcl_Filesystem tclNativeFilesystem = { "native", sizeof(Tcl_Filesystem), TCL_FILESYSTEM_VERSION_2, &TclNativePathInFilesystem, &TclNativeDupInternalRep, &NativeFreeInternalRep, &TclpNativeToNormalized, &TclNativeCreateNativeRep, &TclpObjNormalizePath, &TclpFilesystemPathType, &NativeFilesystemSeparator, &TclpObjStat, &TclpObjAccess, &TclpOpenFileChannel, &TclpMatchInDirectory, &TclpUtime, #ifndef S_IFLNK NULL, #else &TclpObjLink, #endif /* S_IFLNK */ &TclpObjListVolumes, &NativeFileAttrStrings, &NativeFileAttrsGet, &NativeFileAttrsSet, &TclpObjCreateDirectory, &TclpObjRemoveDirectory, &TclpObjDeleteFile, &TclpObjCopyFile, &TclpObjRenameFile, &TclpObjCopyDirectory, &TclpObjLstat, &TclpDlopen, /* Needs a cast since we're using version_2 */ (Tcl_FSGetCwdProc *) &TclpGetNativeCwd, &TclpObjChdir }; /* * Define the tail of the linked list. Note that for unconventional uses of * Tcl without a native filesystem, we may in the future wish to modify the * current approach of hard-coding the native filesystem in the lookup list * 'filesystemList' below. * * We initialize the record so that it thinks one file uses it. This means it * will never be freed. */ static FilesystemRecord nativeFilesystemRecord = { NULL, &tclNativeFilesystem, 1, NULL }; /* * This is incremented each time we modify the linked list of filesystems. Any * time it changes, all cached filesystem representations are suspect and must * be freed. For multithreading builds, change of the filesystem epoch will * trigger cache cleanup in all threads. */ static int theFilesystemEpoch = 0; /* * Stores the linked list of filesystems. A 1:1 copy of this list is also * maintained in the TSD for each thread. This is to avoid synchronization * issues. */ static FilesystemRecord *filesystemList = &nativeFilesystemRecord; TCL_DECLARE_MUTEX(filesystemMutex) /* * Used to implement Tcl_FSGetCwd in a file-system independent way. */ static Tcl_Obj* cwdPathPtr = NULL; static int cwdPathEpoch = 0; static ClientData cwdClientData = NULL; TCL_DECLARE_MUTEX(cwdMutex) Tcl_ThreadDataKey tclFsDataKey; /* * One of these structures is used each time we successfully load a file from * a file system by way of making a temporary copy of the file on the native * filesystem. We need to store both the actual unloadProc/clientData * combination which was used, and the original and modified filenames, so * that we can correctly undo the entire operation when we want to unload the * code. */ typedef struct FsDivertLoad { Tcl_LoadHandle loadHandle; Tcl_FSUnloadFileProc *unloadProcPtr; Tcl_Obj *divertedFile; const Tcl_Filesystem *divertedFilesystem; ClientData divertedFileNativeRep; } FsDivertLoad; /* * Now move on to the basic filesystem implementation */ static void FsThrExitProc( ClientData cd) { ThreadSpecificData *tsdPtr = (ThreadSpecificData *) cd; FilesystemRecord *fsRecPtr = NULL, *tmpFsRecPtr = NULL; /* * Trash the cwd copy. */ if (tsdPtr->cwdPathPtr != NULL) { Tcl_DecrRefCount(tsdPtr->cwdPathPtr); tsdPtr->cwdPathPtr = NULL; } if (tsdPtr->cwdClientData != NULL) { NativeFreeInternalRep(tsdPtr->cwdClientData); } /* * Trash the filesystems cache. */ fsRecPtr = tsdPtr->filesystemList; while (fsRecPtr != NULL) { tmpFsRecPtr = fsRecPtr->nextPtr; if (--fsRecPtr->fileRefCount <= 0) { ckfree((char *)fsRecPtr); } fsRecPtr = tmpFsRecPtr; } tsdPtr->initialized = 0; } int TclFSCwdIsNative(void) { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&tclFsDataKey); if (tsdPtr->cwdClientData != NULL) { return 1; } else { return 0; } } /* *---------------------------------------------------------------------- * * TclFSCwdPointerEquals -- * * Check whether the current working directory is equal to the path * given. * * Results: * 1 (equal) or 0 (un-equal) as appropriate. * * Side effects: * If the paths are equal, but are not the same object, this method will * modify the given pathPtrPtr to refer to the same object. In this case * the object pointed to by pathPtrPtr will have its refCount * decremented, and it will be adjusted to point to the cwd (with a new * refCount). * *---------------------------------------------------------------------- */ int TclFSCwdPointerEquals( Tcl_Obj** pathPtrPtr) { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&tclFsDataKey); Tcl_MutexLock(&cwdMutex); if (tsdPtr->cwdPathPtr == NULL || tsdPtr->cwdPathEpoch != cwdPathEpoch) { if (tsdPtr->cwdPathPtr != NULL) { Tcl_DecrRefCount(tsdPtr->cwdPathPtr); } if (tsdPtr->cwdClientData != NULL) { NativeFreeInternalRep(tsdPtr->cwdClientData); } if (cwdPathPtr == NULL) { tsdPtr->cwdPathPtr = NULL; } else { tsdPtr->cwdPathPtr = Tcl_DuplicateObj(cwdPathPtr); Tcl_IncrRefCount(tsdPtr->cwdPathPtr); } if (cwdClientData == NULL) { tsdPtr->cwdClientData = NULL; } else { tsdPtr->cwdClientData = TclNativeDupInternalRep(cwdClientData); } tsdPtr->cwdPathEpoch = cwdPathEpoch; } Tcl_MutexUnlock(&cwdMutex); if (tsdPtr->initialized == 0) { Tcl_CreateThreadExitHandler(FsThrExitProc, (ClientData) tsdPtr); tsdPtr->initialized = 1; } if (pathPtrPtr == NULL) { return (tsdPtr->cwdPathPtr == NULL); } if (tsdPtr->cwdPathPtr == *pathPtrPtr) { return 1; } else { int len1, len2; const char *str1, *str2; str1 = Tcl_GetStringFromObj(tsdPtr->cwdPathPtr, &len1); str2 = Tcl_GetStringFromObj(*pathPtrPtr, &len2); if (len1 == len2 && !strcmp(str1,str2)) { /* * They are equal, but different objects. Update so they will be * the same object in the future. */ Tcl_DecrRefCount(*pathPtrPtr); *pathPtrPtr = tsdPtr->cwdPathPtr; Tcl_IncrRefCount(*pathPtrPtr); return 1; } else { return 0; } } } #ifdef TCL_THREADS static void FsRecacheFilesystemList(void) { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&tclFsDataKey); FilesystemRecord *fsRecPtr, *tmpFsRecPtr = NULL; /* * Trash the current cache. */ fsRecPtr = tsdPtr->filesystemList; while (fsRecPtr != NULL) { tmpFsRecPtr = fsRecPtr->nextPtr; if (--fsRecPtr->fileRefCount <= 0) { ckfree((char *)fsRecPtr); } fsRecPtr = tmpFsRecPtr; } tsdPtr->filesystemList = NULL; /* * Code below operates on shared data. We are already called under mutex * lock so we can safely proceed. * * Locate tail of the global filesystem list. */ fsRecPtr = filesystemList; while (fsRecPtr != NULL) { tmpFsRecPtr = fsRecPtr; fsRecPtr = fsRecPtr->nextPtr; } /* * Refill the cache honouring the order. */ fsRecPtr = tmpFsRecPtr; while (fsRecPtr != NULL) { tmpFsRecPtr = (FilesystemRecord *) ckalloc(sizeof(FilesystemRecord)); *tmpFsRecPtr = *fsRecPtr; tmpFsRecPtr->nextPtr = tsdPtr->filesystemList; tmpFsRecPtr->prevPtr = NULL; if (tsdPtr->filesystemList) { tsdPtr->filesystemList->prevPtr = tmpFsRecPtr; } tsdPtr->filesystemList = tmpFsRecPtr; fsRecPtr = fsRecPtr->prevPtr; } /* * Make sure the above gets released on thread exit. */ if (tsdPtr->initialized == 0) { Tcl_CreateThreadExitHandler(FsThrExitProc, (ClientData) tsdPtr); tsdPtr->initialized = 1; } } #endif /* TCL_THREADS */ static FilesystemRecord * FsGetFirstFilesystem(void) { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&tclFsDataKey); FilesystemRecord *fsRecPtr; #ifndef TCL_THREADS tsdPtr->filesystemEpoch = theFilesystemEpoch; fsRecPtr = filesystemList; #else Tcl_MutexLock(&filesystemMutex); if (tsdPtr->filesystemList == NULL || (tsdPtr->filesystemEpoch != theFilesystemEpoch)) { FsRecacheFilesystemList(); tsdPtr->filesystemEpoch = theFilesystemEpoch; } Tcl_MutexUnlock(&filesystemMutex); fsRecPtr = tsdPtr->filesystemList; #endif return fsRecPtr; } /* * The epoch can be changed both by filesystems being added or removed and by * env(HOME) changing. */ int TclFSEpochOk( int filesystemEpoch) { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&tclFsDataKey); (void) FsGetFirstFilesystem(); return (filesystemEpoch == tsdPtr->filesystemEpoch); } /* * If non-NULL, clientData is owned by us and must be freed later. */ static void FsUpdateCwd( Tcl_Obj *cwdObj, ClientData clientData) { int len; char *str = NULL; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&tclFsDataKey); if (cwdObj != NULL) { str = Tcl_GetStringFromObj(cwdObj, &len); } Tcl_MutexLock(&cwdMutex); if (cwdPathPtr != NULL) { Tcl_DecrRefCount(cwdPathPtr); } if (cwdClientData != NULL) { NativeFreeInternalRep(cwdClientData); } if (cwdObj == NULL) { cwdPathPtr = NULL; cwdClientData = NULL; } else { /* * This must be stored as string obj! */ cwdPathPtr = Tcl_NewStringObj(str, len); Tcl_IncrRefCount(cwdPathPtr); cwdClientData = TclNativeDupInternalRep(clientData); } cwdPathEpoch++; tsdPtr->cwdPathEpoch = cwdPathEpoch; Tcl_MutexUnlock(&cwdMutex); if (tsdPtr->cwdPathPtr) { Tcl_DecrRefCount(tsdPtr->cwdPathPtr); } if (tsdPtr->cwdClientData) { NativeFreeInternalRep(tsdPtr->cwdClientData); } if (cwdObj == NULL) { tsdPtr->cwdPathPtr = NULL; tsdPtr->cwdClientData = NULL; } else { tsdPtr->cwdPathPtr = Tcl_NewStringObj(str, len); tsdPtr->cwdClientData = clientData; Tcl_IncrRefCount(tsdPtr->cwdPathPtr); } } /* *---------------------------------------------------------------------- * * TclFinalizeFilesystem -- * * Clean up the filesystem. After this, calls to all Tcl_FS... functions * will fail. * * We will later call TclResetFilesystem to restore the FS to a pristine * state. * * Results: * None. * * Side effects: * Frees any memory allocated by the filesystem. * *---------------------------------------------------------------------- */ void TclFinalizeFilesystem(void) { FilesystemRecord *fsRecPtr; /* * Assumption that only one thread is active now. Otherwise we would need * to put various mutexes around this code. */ if (cwdPathPtr != NULL) { Tcl_DecrRefCount(cwdPathPtr); cwdPathPtr = NULL; cwdPathEpoch = 0; } if (cwdClientData != NULL) { NativeFreeInternalRep(cwdClientData); cwdClientData = NULL; } /* * Remove all filesystems, freeing any allocated memory that is no longer * needed */ fsRecPtr = filesystemList; while (fsRecPtr != NULL) { FilesystemRecord *tmpFsRecPtr = fsRecPtr->nextPtr; if (fsRecPtr->fileRefCount <= 0) { /* * The native filesystem is static, so we don't free it. */ if (fsRecPtr->fsPtr != &tclNativeFilesystem) { ckfree((char *)fsRecPtr); } } fsRecPtr = tmpFsRecPtr; } filesystemList = NULL; /* * Now filesystemList is NULL. This means that any attempt to use the * filesystem is likely to fail. */ #ifdef USE_OBSOLETE_FS_HOOKS statProcList = NULL; accessProcList = NULL; openFileChannelProcList = NULL; #endif #ifdef __WIN32__ TclWinEncodingsCleanup(); #endif } /* *---------------------------------------------------------------------- * * TclResetFilesystem -- * * Restore the filesystem to a pristine state. * * Results: * None. * * Side effects: * None. * *---------------------------------------------------------------------- */ void TclResetFilesystem(void) { filesystemList = &nativeFilesystemRecord; /* * Note, at this point, I believe nativeFilesystemRecord -> fileRefCount * should equal 1 and if not, we should try to track down the cause. */ #ifdef __WIN32__ /* * Cleans up the win32 API filesystem proc lookup table. This must happen * very late in finalization so that deleting of copied dlls can occur. */ TclWinResetInterfaces(); #endif } /* *---------------------------------------------------------------------- * * Tcl_FSRegister -- * * Insert the filesystem function table at the head of the list of * functions which are used during calls to all file-system operations. * The filesystem will be added even if it is already in the list. (You * can use Tcl_FSData to check if it is in the list, provided the * ClientData used was not NULL). * * Note that the filesystem handling is head-to-tail of the list. Each * filesystem is asked in turn whether it can handle a particular * request, until one of them says 'yes'. At that point no further * filesystems are asked. * * In particular this means if you want to add a diagnostic filesystem * (which simply reports all fs activity), it must be at the head of the * list: i.e. it must be the last registered. * * Results: * Normally TCL_OK; TCL_ERROR if memory for a new node in the list could * not be allocated. * * Side effects: * Memory allocated and modifies the link list for filesystems. * *---------------------------------------------------------------------- */ int Tcl_FSRegister( ClientData clientData, /* Client specific data for this fs */ Tcl_Filesystem *fsPtr) /* The filesystem record for the new fs. */ { FilesystemRecord *newFilesystemPtr; if (fsPtr == NULL) { return TCL_ERROR; } newFilesystemPtr = (FilesystemRecord *) ckalloc(sizeof(FilesystemRecord)); newFilesystemPtr->clientData = clientData; newFilesystemPtr->fsPtr = fsPtr; /* * We start with a refCount of 1. If this drops to zero, then anyone is * welcome to ckfree us. */ newFilesystemPtr->fileRefCount = 1; /* * Is this lock and wait strictly speaking necessary? Since any iterators * out there will have grabbed a copy of the head of the list and be * iterating away from that, if we add a new element to the head of the * list, it can't possibly have any effect on any of their loops. In fact * it could be better not to wait, since we are adjusting the filesystem * epoch, any cached representations calculated by existing iterators are * going to have to be thrown away anyway. * * However, since registering and unregistering filesystems is a very rare * action, this is not a very important point. */ Tcl_MutexLock(&filesystemMutex); newFilesystemPtr->nextPtr = filesystemList; newFilesystemPtr->prevPtr = NULL; if (filesystemList) { filesystemList->prevPtr = newFilesystemPtr; } filesystemList = newFilesystemPtr; /* * Increment the filesystem epoch counter, since existing paths might * conceivably now belong to different filesystems. */ theFilesystemEpoch++; Tcl_MutexUnlock(&filesystemMutex); return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_FSUnregister -- * * Remove the passed filesystem from the list of filesystem function * tables. It also ensures that the built-in (native) filesystem is not * removable, although we may wish to change that decision in the future * to allow a smaller Tcl core, in which the native filesystem is not * used at all (we could, say, initialise Tcl completely over a network * connection). * * Results: * TCL_OK if the function pointer was successfully removed, TCL_ERROR * otherwise. * * Side effects: * Memory may be deallocated (or will be later, once no "path" objects * refer to this filesystem), but the list of registered filesystems is * updated immediately. * *---------------------------------------------------------------------- */ int Tcl_FSUnregister( Tcl_Filesystem *fsPtr) /* The filesystem record to remove. */ { int retVal = TCL_ERROR; FilesystemRecord *fsRecPtr; Tcl_MutexLock(&filesystemMutex); /* * Traverse the 'filesystemList' looking for the particular node whose * 'fsPtr' member matches 'fsPtr' and remove that one from the list. * Ensure that the "default" node cannot be removed. */ fsRecPtr = filesystemList; while ((retVal == TCL_ERROR) && (fsRecPtr->fsPtr != &tclNativeFilesystem)) { if (fsRecPtr->fsPtr == fsPtr) { if (fsRecPtr->prevPtr) { fsRecPtr->prevPtr->nextPtr = fsRecPtr->nextPtr; } else { filesystemList = fsRecPtr->nextPtr; } if (fsRecPtr->nextPtr) { fsRecPtr->nextPtr->prevPtr = fsRecPtr->prevPtr; } /* * Increment the filesystem epoch counter, since existing paths * might conceivably now belong to different filesystems. This * should also ensure that paths which have cached the filesystem * which is about to be deleted do not reference that filesystem * (which would of course lead to memory exceptions). */ theFilesystemEpoch++; fsRecPtr->fileRefCount--; if (fsRecPtr->fileRefCount <= 0) { ckfree((char *)fsRecPtr); } retVal = TCL_OK; } else { fsRecPtr = fsRecPtr->nextPtr; } } Tcl_MutexUnlock(&filesystemMutex); return retVal; } /* *---------------------------------------------------------------------- * * Tcl_FSMatchInDirectory -- * * This routine is used by the globbing code to search a directory for * all files which match a given pattern. The appropriate function for * the filesystem to which pathPtr belongs will be called. If pathPtr * does not belong to any filesystem and if it is NULL or the empty * string, then we assume the pattern is to be matched in the current * working directory. To avoid have the Tcl_FSMatchInDirectoryProc for * each filesystem from having to deal with this issue, we create a * pathPtr on the fly (equal to the cwd), and then remove it from the * results returned. This makes filesystems easy to write, since they can * assume the pathPtr passed to them is an ordinary path. In fact this * means we could remove such special case handling from Tcl's native * filesystems. * * If 'pattern' is NULL, then pathPtr is assumed to be a fully specified * path of a single file/directory which must be checked for existence * and correct type. * * Results: * * The return value is a standard Tcl result indicating whether an error * occurred in globbing. Error messages are placed in interp, but good * results are placed in the resultPtr given. * * Recursive searches, e.g. * glob -dir $dir -join * pkgIndex.tcl * which must recurse through each directory matching '*' are handled * internally by Tcl, by passing specific flags in a modified 'types' * parameter. This means the actual filesystem only ever sees patterns * which match in a single directory. * * Side effects: * The interpreter may have an error message inserted into it. * *---------------------------------------------------------------------- */ int Tcl_FSMatchInDirectory( Tcl_Interp *interp, /* Interpreter to receive error messages, but * may be NULL. */ Tcl_Obj *resultPtr, /* List object to receive results. */ Tcl_Obj *pathPtr, /* Contains path to directory to search. */ const char *pattern, /* Pattern to match against. */ Tcl_GlobTypeData *types) /* Object containing list of acceptable types. * May be NULL. In particular the directory * flag is very important. */ { const Tcl_Filesystem *fsPtr; Tcl_Obj *cwd, *tmpResultPtr, **elemsPtr; int resLength, i, ret = -1; if (types != NULL && types->type & TCL_GLOB_TYPE_MOUNT) { /* * We don't currently allow querying of mounts by external code (a * valuable future step), so since we're the only function that * actually knows about mounts, this means we're being called * recursively by ourself. Return no matches. */ return TCL_OK; } if (pathPtr != NULL) { fsPtr = Tcl_FSGetFileSystemForPath(pathPtr); } else { fsPtr = NULL; } /* * Check if we've successfully mapped the path to a filesystem within * which to search. */ if (fsPtr != NULL) { if (fsPtr->matchInDirectoryProc == NULL) { Tcl_SetErrno(ENOENT); return -1; } ret = (*fsPtr->matchInDirectoryProc)(interp, resultPtr, pathPtr, pattern, types); if (ret == TCL_OK && pattern != NULL) { FsAddMountsToGlobResult(resultPtr, pathPtr, pattern, types); } return ret; } /* * If the path isn't empty, we have no idea how to match files in a * directory which belongs to no known filesystem */ if (pathPtr != NULL && TclGetString(pathPtr)[0] != '\0') { Tcl_SetErrno(ENOENT); return -1; } /* * We have an empty or NULL path. This is defined to mean we must search * for files within the current 'cwd'. We therefore use that, but then * since the proc we call will return results which include the cwd we * must then trim it off the front of each path in the result. We choose * to deal with this here (in the generic code), since if we don't, every * single filesystem's implementation of Tcl_FSMatchInDirectory will have * to deal with it for us. */ cwd = Tcl_FSGetCwd(NULL); if (cwd == NULL) { if (interp != NULL) { Tcl_SetResult(interp, "glob couldn't determine " "the current working directory", TCL_STATIC); } return TCL_ERROR; } fsPtr = Tcl_FSGetFileSystemForPath(cwd); if (fsPtr != NULL && fsPtr->matchInDirectoryProc != NULL) { TclNewObj(tmpResultPtr); Tcl_IncrRefCount(tmpResultPtr); ret = (*fsPtr->matchInDirectoryProc)(interp, tmpResultPtr, cwd, pattern, types); if (ret == TCL_OK) { FsAddMountsToGlobResult(tmpResultPtr, cwd, pattern, types); /* * Note that we know resultPtr and tmpResultPtr are distinct. */ ret = Tcl_ListObjGetElements(interp, tmpResultPtr, &resLength, &elemsPtr); for (i=0 ; ret==TCL_OK && itype & TCL_GLOB_TYPE_DIR)); Tcl_Obj *mounts = FsListMounts(pathPtr, pattern); if (mounts == NULL) { return; } if (Tcl_ListObjLength(NULL, mounts, &mLength) != TCL_OK || mLength == 0) { goto endOfMounts; } if (Tcl_ListObjLength(NULL, resultPtr, &gLength) != TCL_OK) { goto endOfMounts; } for (i=0 ; ifsPtr == fsPtr) { retVal = fsRecPtr->clientData; } fsRecPtr = fsRecPtr->nextPtr; } return retVal; } /* *--------------------------------------------------------------------------- * * TclFSNormalizeToUniquePath -- * * Takes a path specification containing no ../, ./ sequences, and * converts it into a unique path for the given platform. On Unix, this * means the path must be free of symbolic links/aliases, and on Windows * it means we want the long form, with that long form's case-dependence * (which gives us a unique, case-dependent path). * * Results: * The pathPtr is modified in place. The return value is the last byte * offset which was recognised in the path string. * * Side effects: * None (beyond the memory allocation for the result). * * Special notes: * If the filesystem-specific normalizePathProcs can re-introduce ../, ./ * sequences into the path, then this function will not return the * correct result. This may be possible with symbolic links on unix. * * Important assumption: if startAt is non-zero, it must point to a * directory separator that we know exists and is already normalized (so * it is important not to point to the char just after the separator). * *--------------------------------------------------------------------------- */ int TclFSNormalizeToUniquePath( Tcl_Interp *interp, /* Used for error messages. */ Tcl_Obj *pathPtr, /* The path to normalize in place */ int startAt, /* Start at this char-offset */ ClientData *clientDataPtr) /* If we generated a complete normalized path * for a given filesystem, we can optionally * return an fs-specific clientdata here. */ { FilesystemRecord *fsRecPtr, *firstFsRecPtr; /* Ignore this variable */ (void) clientDataPtr; /* * Call each of the "normalise path" functions in succession. This is a * special case, in which if we have a native filesystem handler, we call * it first. This is because the root of Tcl's filesystem is always a * native filesystem (i.e. '/' on unix is native). */ firstFsRecPtr = FsGetFirstFilesystem(); fsRecPtr = firstFsRecPtr; while (fsRecPtr != NULL) { if (fsRecPtr->fsPtr == &tclNativeFilesystem) { Tcl_FSNormalizePathProc *proc = fsRecPtr->fsPtr->normalizePathProc; if (proc != NULL) { startAt = (*proc)(interp, pathPtr, startAt); } break; } fsRecPtr = fsRecPtr->nextPtr; } fsRecPtr = firstFsRecPtr; while (fsRecPtr != NULL) { /* * Skip the native system next time through. */ if (fsRecPtr->fsPtr != &tclNativeFilesystem) { Tcl_FSNormalizePathProc *proc = fsRecPtr->fsPtr->normalizePathProc; if (proc != NULL) { startAt = (*proc)(interp, pathPtr, startAt); } /* * We could add an efficiency check like this: * if (retVal == length-of(pathPtr)) {break;} * but there's not much benefit. */ } fsRecPtr = fsRecPtr->nextPtr; } return startAt; } /* *--------------------------------------------------------------------------- * * TclGetOpenMode -- * * This routine is an obsolete, limited version of TclGetOpenModeEx() * below. It exists only to satisfy any extensions imprudently using it * via Tcl's internal stubs table. * * Results: * Same as TclGetOpenModeEx(). * * Side effects: * Same as TclGetOpenModeEx(). * *--------------------------------------------------------------------------- */ int TclGetOpenMode( Tcl_Interp *interp, /* Interpreter to use for error reporting - * may be NULL. */ const char *modeString, /* Mode string, e.g. "r+" or "RDONLY CREAT" */ int *seekFlagPtr) /* Set this to 1 if the caller should seek to * EOF during the opening of the file. */ { int binary = 0; return TclGetOpenModeEx(interp, modeString, seekFlagPtr, &binary); } /* *--------------------------------------------------------------------------- * * TclGetOpenModeEx -- * * Computes a POSIX mode mask for opening a file, from a given string, * and also sets flags to indicate whether the caller should seek to EOF * after opening the file, and whether the caller should configure the * channel for binary data. * * Results: * On success, returns mode to pass to "open". If an error occurs, the * return value is -1 and if interp is not NULL, sets interp's result * object to an error message. * * Side effects: * Sets the integer referenced by seekFlagPtr to 1 to tell the caller to * seek to EOF after opening the file, or to 0 otherwise. Sets the * integer referenced by binaryPtr to 1 to tell the caller to seek to * configure the channel for binary data, or to 0 otherwise. * * Special note: * This code is based on a prototype implementation contributed by Mark * Diekhans. * *--------------------------------------------------------------------------- */ int TclGetOpenModeEx( Tcl_Interp *interp, /* Interpreter to use for error reporting - * may be NULL. */ const char *modeString, /* Mode string, e.g. "r+" or "RDONLY CREAT" */ int *seekFlagPtr, /* Set this to 1 if the caller should seek to * EOF during the opening of the file. */ int *binaryPtr) /* Set this to 1 if the caller should * configure the opened channel for binary * operations */ { int mode, modeArgc, c, i, gotRW; const char **modeArgv, *flag; #define RW_MODES (O_RDONLY|O_WRONLY|O_RDWR) /* * Check for the simpler fopen-like access modes (e.g. "r"). They are * distinguished from the POSIX access modes by the presence of a * lower-case first letter. */ *seekFlagPtr = 0; *binaryPtr = 0; mode = 0; /* * Guard against international characters before using byte oriented * routines. */ if (!(modeString[0] & 0x80) && islower(UCHAR(modeString[0]))) { /* INTL: ISO only. */ switch (modeString[0]) { case 'r': mode = O_RDONLY; break; case 'w': mode = O_WRONLY|O_CREAT|O_TRUNC; break; case 'a': /* * Added O_APPEND for proper automatic seek-to-end-on-write by the * OS. [Bug 680143] */ mode = O_WRONLY|O_CREAT|O_APPEND; *seekFlagPtr = 1; break; default: goto error; } i=1; while (i<3 && modeString[i]) { if (modeString[i] == modeString[i-1]) { goto error; } switch (modeString[i++]) { case '+': /* * Must remove the O_APPEND flag so that the seek command * works. [Bug 1773127] */ mode &= ~(O_RDONLY|O_WRONLY|O_APPEND); mode |= O_RDWR; break; case 'b': *binaryPtr = 1; break; default: goto error; } } if (modeString[i] != 0) { goto error; } return mode; error: *seekFlagPtr = 0; *binaryPtr = 0; if (interp != NULL) { Tcl_AppendResult(interp, "illegal access mode \"", modeString, "\"", NULL); } return -1; } /* * The access modes are specified using a list of POSIX modes such as * O_CREAT. * * IMPORTANT NOTE: We rely on Tcl_SplitList working correctly when a NULL * interpreter is passed in. */ if (Tcl_SplitList(interp, modeString, &modeArgc, &modeArgv) != TCL_OK) { if (interp != NULL) { Tcl_AddErrorInfo(interp, "\n while processing open access modes \""); Tcl_AddErrorInfo(interp, modeString); Tcl_AddErrorInfo(interp, "\""); } return -1; } gotRW = 0; for (i = 0; i < modeArgc; i++) { flag = modeArgv[i]; c = flag[0]; if ((c == 'R') && (strcmp(flag, "RDONLY") == 0)) { mode = (mode & ~RW_MODES) | O_RDONLY; gotRW = 1; } else if ((c == 'W') && (strcmp(flag, "WRONLY") == 0)) { mode = (mode & ~RW_MODES) | O_WRONLY; gotRW = 1; } else if ((c == 'R') && (strcmp(flag, "RDWR") == 0)) { mode = (mode & ~RW_MODES) | O_RDWR; gotRW = 1; } else if ((c == 'A') && (strcmp(flag, "APPEND") == 0)) { mode |= O_APPEND; *seekFlagPtr = 1; } else if ((c == 'C') && (strcmp(flag, "CREAT") == 0)) { mode |= O_CREAT; } else if ((c == 'E') && (strcmp(flag, "EXCL") == 0)) { mode |= O_EXCL; } else if ((c == 'N') && (strcmp(flag, "NOCTTY") == 0)) { #ifdef O_NOCTTY mode |= O_NOCTTY; #else if (interp != NULL) { Tcl_AppendResult(interp, "access mode \"", flag, "\" not supported by this system", NULL); } ckfree((char *) modeArgv); return -1; #endif } else if ((c == 'N') && (strcmp(flag, "NONBLOCK") == 0)) { #ifdef O_NONBLOCK mode |= O_NONBLOCK; #else if (interp != NULL) { Tcl_AppendResult(interp, "access mode \"", flag, "\" not supported by this system", NULL); } ckfree((char *) modeArgv); return -1; #endif } else if ((c == 'T') && (strcmp(flag, "TRUNC") == 0)) { mode |= O_TRUNC; } else if ((c == 'B') && (strcmp(flag, "BINARY") == 0)) { *binaryPtr = 1; } else { if (interp != NULL) { Tcl_AppendResult(interp, "invalid access mode \"", flag, "\": must be RDONLY, WRONLY, RDWR, APPEND, BINARY, " "CREAT, EXCL, NOCTTY, NONBLOCK, or TRUNC", NULL); } ckfree((char *) modeArgv); return -1; } } ckfree((char *) modeArgv); if (!gotRW) { if (interp != NULL) { Tcl_AppendResult(interp, "access mode must include either" " RDONLY, WRONLY, or RDWR", NULL); } return -1; } return mode; } /* * Tcl_FSEvalFile is Tcl_FSEvalFileEx without encoding argument. */ int Tcl_FSEvalFile( Tcl_Interp *interp, /* Interpreter in which to process file. */ Tcl_Obj *pathPtr) /* Path of file to process. Tilde-substitution * will be performed on this name. */ { return Tcl_FSEvalFileEx(interp, pathPtr, NULL); } /* *---------------------------------------------------------------------- * * Tcl_FSEvalFileEx -- * * Read in a file and process the entire file as one gigantic Tcl * command. * * Results: * A standard Tcl result, which is either the result of executing the * file or an error indicating why the file couldn't be read. * * Side effects: * Depends on the commands in the file. During the evaluation of the * contents of the file, iPtr->scriptFile is made to point to pathPtr * (the old value is cached and replaced when this function returns). * *---------------------------------------------------------------------- */ int Tcl_FSEvalFileEx( Tcl_Interp *interp, /* Interpreter in which to process file. */ Tcl_Obj *pathPtr, /* Path of file to process. Tilde-substitution * will be performed on this name. */ const char *encodingName) /* If non-NULL, then use this encoding for the * file. NULL means use the system encoding. */ { int length, result = TCL_ERROR; Tcl_StatBuf statBuf; Tcl_Obj *oldScriptFile; Interp *iPtr; char *string; Tcl_Channel chan; Tcl_Obj *objPtr; if (Tcl_FSGetNormalizedPath(interp, pathPtr) == NULL) { return result; } if (Tcl_FSStat(pathPtr, &statBuf) == -1) { Tcl_SetErrno(errno); Tcl_AppendResult(interp, "couldn't read file \"", Tcl_GetString(pathPtr), "\": ", Tcl_PosixError(interp), NULL); return result; } chan = Tcl_FSOpenFileChannel(interp, pathPtr, "r", 0644); if (chan == (Tcl_Channel) NULL) { Tcl_ResetResult(interp); Tcl_AppendResult(interp, "couldn't read file \"", Tcl_GetString(pathPtr), "\": ", Tcl_PosixError(interp), NULL); return result; } /* * The eofchar is \32 (^Z). This is the usual on Windows, but we effect * this cross-platform to allow for scripted documents. [Bug: 2040] */ Tcl_SetChannelOption(interp, chan, "-eofchar", "\32"); /* * If the encoding is specified, set it for the channel. Else don't touch * it (and use the system encoding) Report error on unknown encoding. */ if (encodingName != NULL) { if (Tcl_SetChannelOption(interp, chan, "-encoding", encodingName) != TCL_OK) { Tcl_Close(interp,chan); return result; } } objPtr = Tcl_NewObj(); Tcl_IncrRefCount(objPtr); if (Tcl_ReadChars(chan, objPtr, -1, 0) < 0) { Tcl_Close(interp, chan); Tcl_AppendResult(interp, "couldn't read file \"", Tcl_GetString(pathPtr), "\": ", Tcl_PosixError(interp), NULL); goto end; } if (Tcl_Close(interp, chan) != TCL_OK) { goto end; } iPtr = (Interp *) interp; oldScriptFile = iPtr->scriptFile; iPtr->scriptFile = pathPtr; Tcl_IncrRefCount(iPtr->scriptFile); string = Tcl_GetStringFromObj(objPtr, &length); /* TIP #280 Force the evaluator to open a frame for a sourced * file. */ iPtr->evalFlags |= TCL_EVAL_FILE; result = Tcl_EvalEx(interp, string, length, 0); /* * Now we have to be careful; the script may have changed the * iPtr->scriptFile value, so we must reset it without assuming it still * points to 'pathPtr'. */ if (iPtr->scriptFile != NULL) { Tcl_DecrRefCount(iPtr->scriptFile); } iPtr->scriptFile = oldScriptFile; if (result == TCL_RETURN) { result = TclUpdateReturnInfo(iPtr); } else if (result == TCL_ERROR) { /* * Record information telling where the error occurred. */ const char *pathString = Tcl_GetStringFromObj(pathPtr, &length); int limit = 150; int overflow = (length > limit); Tcl_AppendObjToErrorInfo(interp, Tcl_ObjPrintf( "\n (file \"%.*s%s\" line %d)", (overflow ? limit : length), pathString, (overflow ? "..." : ""), interp->errorLine)); } end: Tcl_DecrRefCount(objPtr); return result; } /* *---------------------------------------------------------------------- * * Tcl_GetErrno -- * * Gets the current value of the Tcl error code variable. This is * currently the global variable "errno" but could in the future change * to something else. * * Results: * The value of the Tcl error code variable. * * Side effects: * None. Note that the value of the Tcl error code variable is UNDEFINED * if a call to Tcl_SetErrno did not precede this call. * *---------------------------------------------------------------------- */ int Tcl_GetErrno(void) { return errno; } /* *---------------------------------------------------------------------- * * Tcl_SetErrno -- * * Sets the Tcl error code variable to the supplied value. * * Results: * None. * * Side effects: * Modifies the value of the Tcl error code variable. * *---------------------------------------------------------------------- */ void Tcl_SetErrno( int err) /* The new value. */ { errno = err; } /* *---------------------------------------------------------------------- * * Tcl_PosixError -- * * This function is typically called after UNIX kernel calls return * errors. It stores machine-readable information about the error in * errorCode field of interp and returns an information string for the * caller's use. * * Results: * The return value is a human-readable string describing the error. * * Side effects: * The errorCode field of the interp is set. * *---------------------------------------------------------------------- */ const char * Tcl_PosixError( Tcl_Interp *interp) /* Interpreter whose errorCode field is to be * set. */ { const char *id, *msg; msg = Tcl_ErrnoMsg(errno); id = Tcl_ErrnoId(); if (interp) { Tcl_SetErrorCode(interp, "POSIX", id, msg, NULL); } return msg; } /* *---------------------------------------------------------------------- * * Tcl_FSStat -- * * This function replaces the library version of stat and lsat. * * The appropriate function for the filesystem to which pathPtr belongs * will be called. * * Results: * See stat documentation. * * Side effects: * See stat documentation. * *---------------------------------------------------------------------- */ int Tcl_FSStat( Tcl_Obj *pathPtr, /* Path of file to stat (in current CP). */ Tcl_StatBuf *buf) /* Filled with results of stat call. */ { const Tcl_Filesystem *fsPtr; #ifdef USE_OBSOLETE_FS_HOOKS struct stat oldStyleStatBuffer; int retVal = -1; /* * Call each of the "stat" function in succession. A non-return value of * -1 indicates the particular function has succeeded. */ Tcl_MutexLock(&obsoleteFsHookMutex); if (statProcList != NULL) { StatProc *statProcPtr; char *path; Tcl_Obj *transPtr = Tcl_FSGetTranslatedPath(NULL, pathPtr); if (transPtr == NULL) { path = NULL; } else { path = Tcl_GetString(transPtr); } statProcPtr = statProcList; while ((retVal == -1) && (statProcPtr != NULL)) { retVal = (*statProcPtr->proc)(path, &oldStyleStatBuffer); statProcPtr = statProcPtr->nextPtr; } if (transPtr != NULL) { Tcl_DecrRefCount(transPtr); } } Tcl_MutexUnlock(&obsoleteFsHookMutex); if (retVal != -1) { /* * Note that EOVERFLOW is not a problem here, and these assignments * should all be widening (if not identity.) */ buf->st_mode = oldStyleStatBuffer.st_mode; buf->st_ino = oldStyleStatBuffer.st_ino; buf->st_dev = oldStyleStatBuffer.st_dev; #ifdef HAVE_STRUCT_STAT_ST_RDEV buf->st_rdev = oldStyleStatBuffer.st_rdev; #endif buf->st_nlink = oldStyleStatBuffer.st_nlink; buf->st_uid = oldStyleStatBuffer.st_uid; buf->st_gid = oldStyleStatBuffer.st_gid; buf->st_size = Tcl_LongAsWide(oldStyleStatBuffer.st_size); buf->st_atime = oldStyleStatBuffer.st_atime; buf->st_mtime = oldStyleStatBuffer.st_mtime; buf->st_ctime = oldStyleStatBuffer.st_ctime; #ifdef HAVE_STRUCT_STAT_ST_BLKSIZE buf->st_blksize = oldStyleStatBuffer.st_blksize; #endif #ifdef HAVE_STRUCT_STAT_ST_BLOCKS buf->st_blocks = Tcl_LongAsWide(oldStyleStatBuffer.st_blocks); #endif return retVal; } #endif /* USE_OBSOLETE_FS_HOOKS */ fsPtr = Tcl_FSGetFileSystemForPath(pathPtr); if (fsPtr != NULL) { Tcl_FSStatProc *proc = fsPtr->statProc; if (proc != NULL) { return (*proc)(pathPtr, buf); } } Tcl_SetErrno(ENOENT); return -1; } /* *---------------------------------------------------------------------- * * Tcl_FSLstat -- * * This function replaces the library version of lstat. The appropriate * function for the filesystem to which pathPtr belongs will be called. * If no 'lstat' function is listed, but a 'stat' function is, then Tcl * will fall back on the stat function. * * Results: * See lstat documentation. * * Side effects: * See lstat documentation. * *---------------------------------------------------------------------- */ int Tcl_FSLstat( Tcl_Obj *pathPtr, /* Path of file to stat (in current CP). */ Tcl_StatBuf *buf) /* Filled with results of stat call. */ { const Tcl_Filesystem *fsPtr = Tcl_FSGetFileSystemForPath(pathPtr); if (fsPtr != NULL) { Tcl_FSLstatProc *proc = fsPtr->lstatProc; if (proc != NULL) { return (*proc)(pathPtr, buf); } else { Tcl_FSStatProc *sproc = fsPtr->statProc; if (sproc != NULL) { return (*sproc)(pathPtr, buf); } } } Tcl_SetErrno(ENOENT); return -1; } /* *---------------------------------------------------------------------- * * Tcl_FSAccess -- * * This function replaces the library version of access. The appropriate * function for the filesystem to which pathPtr belongs will be called. * * Results: * See access documentation. * * Side effects: * See access documentation. * *---------------------------------------------------------------------- */ int Tcl_FSAccess( Tcl_Obj *pathPtr, /* Path of file to access (in current CP). */ int mode) /* Permission setting. */ { const Tcl_Filesystem *fsPtr; #ifdef USE_OBSOLETE_FS_HOOKS int retVal = -1; /* * Call each of the "access" function in succession. A non-return value of * -1 indicates the particular function has succeeded. */ Tcl_MutexLock(&obsoleteFsHookMutex); if (accessProcList != NULL) { AccessProc *accessProcPtr; char *path; Tcl_Obj *transPtr = Tcl_FSGetTranslatedPath(NULL, pathPtr); if (transPtr == NULL) { path = NULL; } else { path = Tcl_GetString(transPtr); } accessProcPtr = accessProcList; while ((retVal == -1) && (accessProcPtr != NULL)) { retVal = (*accessProcPtr->proc)(path, mode); accessProcPtr = accessProcPtr->nextPtr; } if (transPtr != NULL) { Tcl_DecrRefCount(transPtr); } } Tcl_MutexUnlock(&obsoleteFsHookMutex); if (retVal != -1) { return retVal; } #endif /* USE_OBSOLETE_FS_HOOKS */ fsPtr = Tcl_FSGetFileSystemForPath(pathPtr); if (fsPtr != NULL) { Tcl_FSAccessProc *proc = fsPtr->accessProc; if (proc != NULL) { return (*proc)(pathPtr, mode); } } Tcl_SetErrno(ENOENT); return -1; } /* *---------------------------------------------------------------------- * * Tcl_FSOpenFileChannel -- * * The appropriate function for the filesystem to which pathPtr belongs * will be called. * * Results: * The new channel or NULL, if the named file could not be opened. * * Side effects: * May open the channel and may cause creation of a file on the file * system. * *---------------------------------------------------------------------- */ Tcl_Channel Tcl_FSOpenFileChannel( Tcl_Interp *interp, /* Interpreter for error reporting; can be * NULL. */ Tcl_Obj *pathPtr, /* Name of file to open. */ const char *modeString, /* A list of POSIX open modes or a string such * as "rw". */ int permissions) /* If the open involves creating a file, with * what modes to create it? */ { const Tcl_Filesystem *fsPtr; Tcl_Channel retVal = NULL; #ifdef USE_OBSOLETE_FS_HOOKS /* * Call each of the "Tcl_OpenFileChannel" functions in succession. A * non-NULL return value indicates the particular function has succeeded. */ Tcl_MutexLock(&obsoleteFsHookMutex); if (openFileChannelProcList != NULL) { OpenFileChannelProc *openFileChannelProcPtr; char *path; Tcl_Obj *transPtr = Tcl_FSGetTranslatedPath(interp, pathPtr); if (transPtr == NULL) { path = NULL; } else { path = Tcl_GetString(transPtr); } openFileChannelProcPtr = openFileChannelProcList; while ((retVal == NULL) && (openFileChannelProcPtr != NULL)) { retVal = (*openFileChannelProcPtr->proc)(interp, path, modeString, permissions); openFileChannelProcPtr = openFileChannelProcPtr->nextPtr; } if (transPtr != NULL) { Tcl_DecrRefCount(transPtr); } } Tcl_MutexUnlock(&obsoleteFsHookMutex); if (retVal != NULL) { return retVal; } #endif /* USE_OBSOLETE_FS_HOOKS */ /* * We need this just to ensure we return the correct error messages under * some circumstances. */ if (Tcl_FSGetNormalizedPath(interp, pathPtr) == NULL) { return NULL; } fsPtr = Tcl_FSGetFileSystemForPath(pathPtr); if (fsPtr != NULL) { Tcl_FSOpenFileChannelProc *proc = fsPtr->openFileChannelProc; if (proc != NULL) { int mode, seekFlag, binary; /* * Parse the mode, picking up whether we want to seek to start * with and/or set the channel automatically into binary mode. */ mode = TclGetOpenModeEx(interp, modeString, &seekFlag, &binary); if (mode == -1) { return NULL; } /* * Do the actual open() call. */ retVal = (*proc)(interp, pathPtr, mode, permissions); if (retVal == NULL) { return NULL; } /* * Apply appropriate flags parsed out above. */ if (seekFlag && Tcl_Seek(retVal, (Tcl_WideInt)0, SEEK_END) < (Tcl_WideInt)0) { if (interp != NULL) { Tcl_AppendResult(interp, "could not seek to end " "of file while opening \"", Tcl_GetString(pathPtr), "\": ", Tcl_PosixError(interp), NULL); } Tcl_Close(NULL, retVal); return NULL; } if (binary) { Tcl_SetChannelOption(interp, retVal, "-translation", "binary"); } return retVal; } } /* * File doesn't belong to any filesystem that can open it. */ Tcl_SetErrno(ENOENT); if (interp != NULL) { Tcl_AppendResult(interp, "couldn't open \"", Tcl_GetString(pathPtr), "\": ", Tcl_PosixError(interp), NULL); } return NULL; } /* *---------------------------------------------------------------------- * * Tcl_FSUtime -- * * This function replaces the library version of utime. The appropriate * function for the filesystem to which pathPtr belongs will be called. * * Results: * See utime documentation. * * Side effects: * See utime documentation. * *---------------------------------------------------------------------- */ int Tcl_FSUtime( Tcl_Obj *pathPtr, /* File to change access/modification times */ struct utimbuf *tval) /* Structure containing access/modification * times to use. Should not be modified. */ { const Tcl_Filesystem *fsPtr = Tcl_FSGetFileSystemForPath(pathPtr); if (fsPtr != NULL) { Tcl_FSUtimeProc *proc = fsPtr->utimeProc; if (proc != NULL) { return (*proc)(pathPtr, tval); } } return -1; } /* *---------------------------------------------------------------------- * * NativeFileAttrStrings -- * * This function implements the platform dependent 'file attributes' * subcommand, for the native filesystem, for listing the set of possible * attribute strings. This function is part of Tcl's native filesystem * support, and is placed here because it is shared by Unix and Windows * code. * * Results: * An array of strings * * Side effects: * None. * *---------------------------------------------------------------------- */ static const char ** NativeFileAttrStrings( Tcl_Obj *pathPtr, Tcl_Obj **objPtrRef) { return tclpFileAttrStrings; } /* *---------------------------------------------------------------------- * * NativeFileAttrsGet -- * * This function implements the platform dependent 'file attributes' * subcommand, for the native filesystem, for 'get' operations. This * function is part of Tcl's native filesystem support, and is placed * here because it is shared by Unix and Windows code. * * Results: * Standard Tcl return code. The object placed in objPtrRef (if TCL_OK * was returned) is likely to have a refCount of zero. Either way we must * either store it somewhere (e.g. the Tcl result), or Incr/Decr its * refCount to ensure it is properly freed. * * Side effects: * None. * *---------------------------------------------------------------------- */ static int NativeFileAttrsGet( Tcl_Interp *interp, /* The interpreter for error reporting. */ int index, /* index of the attribute command. */ Tcl_Obj *pathPtr, /* path of file we are operating on. */ Tcl_Obj **objPtrRef) /* for output. */ { return (*tclpFileAttrProcs[index].getProc)(interp, index, pathPtr, objPtrRef); } /* *---------------------------------------------------------------------- * * NativeFileAttrsSet -- * * This function implements the platform dependent 'file attributes' * subcommand, for the native filesystem, for 'set' operations. This * function is part of Tcl's native filesystem support, and is placed * here because it is shared by Unix and Windows code. * * Results: * Standard Tcl return code. * * Side effects: * None. * *---------------------------------------------------------------------- */ static int NativeFileAttrsSet( Tcl_Interp *interp, /* The interpreter for error reporting. */ int index, /* index of the attribute command. */ Tcl_Obj *pathPtr, /* path of file we are operating on. */ Tcl_Obj *objPtr) /* set to this value. */ { return (*tclpFileAttrProcs[index].setProc)(interp, index, pathPtr, objPtr); } /* *---------------------------------------------------------------------- * * Tcl_FSFileAttrStrings -- * * This function implements part of the hookable 'file attributes' * subcommand. The appropriate function for the filesystem to which * pathPtr belongs will be called. * * Results: * The called function may either return an array of strings, or may * instead return NULL and place a Tcl list into the given objPtrRef. * Tcl will take that list and first increment its refCount before using * it. On completion of that use, Tcl will decrement its refCount. Hence * if the list should be disposed of by Tcl when done, it should have a * refCount of zero, and if the list should not be disposed of, the * filesystem should ensure it retains a refCount on the object. * * Side effects: * None. * *---------------------------------------------------------------------- */ const char ** Tcl_FSFileAttrStrings( Tcl_Obj *pathPtr, Tcl_Obj **objPtrRef) { const Tcl_Filesystem *fsPtr = Tcl_FSGetFileSystemForPath(pathPtr); if (fsPtr != NULL) { Tcl_FSFileAttrStringsProc *proc = fsPtr->fileAttrStringsProc; if (proc != NULL) { return (*proc)(pathPtr, objPtrRef); } } Tcl_SetErrno(ENOENT); return NULL; } /* *---------------------------------------------------------------------- * * TclFSFileAttrIndex -- * * Helper function for converting an attribute name to an index into the * attribute table. * * Results: * Tcl result code, index written to *indexPtr on result==TCL_OK * * Side effects: * None. * *---------------------------------------------------------------------- */ int TclFSFileAttrIndex( Tcl_Obj *pathPtr, /* File whose attributes are to be indexed * into. */ const char *attributeName, /* The attribute being looked for. */ int *indexPtr) /* Where to write the found index. */ { Tcl_Obj *listObj = NULL; const char **attrTable; /* * Get the attribute table for the file. */ attrTable = Tcl_FSFileAttrStrings(pathPtr, &listObj); if (listObj != NULL) { Tcl_IncrRefCount(listObj); } if (attrTable != NULL) { /* * It's a constant attribute table, so use T_GIFO. */ Tcl_Obj *tmpObj = Tcl_NewStringObj(attributeName, -1); int result; result = Tcl_GetIndexFromObj(NULL, tmpObj, attrTable, NULL, TCL_EXACT, indexPtr); TclDecrRefCount(tmpObj); if (listObj != NULL) { TclDecrRefCount(listObj); } return result; } else if (listObj != NULL) { /* * It's a non-constant attribute list, so do a literal search. */ int i, objc; Tcl_Obj **objv; if (Tcl_ListObjGetElements(NULL, listObj, &objc, &objv) != TCL_OK) { TclDecrRefCount(listObj); return TCL_ERROR; } for (i=0 ; ifileAttrsGetProc; if (proc != NULL) { return (*proc)(interp, index, pathPtr, objPtrRef); } } Tcl_SetErrno(ENOENT); return -1; } /* *---------------------------------------------------------------------- * * Tcl_FSFileAttrsSet -- * * This function implements write access for the hookable 'file * attributes' subcommand. The appropriate function for the filesystem to * which pathPtr belongs will be called. * * Results: * Standard Tcl return code. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_FSFileAttrsSet( Tcl_Interp *interp, /* The interpreter for error reporting. */ int index, /* index of the attribute command. */ Tcl_Obj *pathPtr, /* filename we are operating on. */ Tcl_Obj *objPtr) /* Input value. */ { const Tcl_Filesystem *fsPtr = Tcl_FSGetFileSystemForPath(pathPtr); if (fsPtr != NULL) { Tcl_FSFileAttrsSetProc *proc = fsPtr->fileAttrsSetProc; if (proc != NULL) { return (*proc)(interp, index, pathPtr, objPtr); } } Tcl_SetErrno(ENOENT); return -1; } /* *---------------------------------------------------------------------- * * Tcl_FSGetCwd -- * * This function replaces the library version of getcwd(). * * Most VFS's will *not* implement a 'cwdProc'. Tcl now maintains its own * record (in a Tcl_Obj) of the cwd, and an attempt is made to synch this * with the cwd's containing filesystem, if that filesystem provides a * cwdProc (e.g. the native filesystem). * * Note that if Tcl's cwd is not in the native filesystem, then of course * Tcl's cwd and the native cwd are different: extensions should * therefore ensure they only access the cwd through this function to * avoid confusion. * * If a global cwdPathPtr already exists, it is cached in the thread's * private data structures and reference to the cached copy is returned, * subject to a synchronisation attempt in that cwdPathPtr's fs. * * Otherwise, the chain of functions that have been "inserted" into the * filesystem will be called in succession until either a value other * than NULL is returned, or the entire list is visited. * * Results: * The result is a pointer to a Tcl_Obj specifying the current directory, * or NULL if the current directory could not be determined. If NULL is * returned, an error message is left in the interp's result. * * The result already has its refCount incremented for the caller. When * it is no longer needed, that refCount should be decremented. * * Side effects: * Various objects may be freed and allocated. * *---------------------------------------------------------------------- */ Tcl_Obj * Tcl_FSGetCwd( Tcl_Interp *interp) { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&tclFsDataKey); if (TclFSCwdPointerEquals(NULL)) { FilesystemRecord *fsRecPtr; Tcl_Obj *retVal = NULL; /* * We've never been called before, try to find a cwd. Call each of the * "Tcl_GetCwd" function in succession. A non-NULL return value * indicates the particular function has succeeded. */ fsRecPtr = FsGetFirstFilesystem(); while ((retVal == NULL) && (fsRecPtr != NULL)) { Tcl_FSGetCwdProc *proc = fsRecPtr->fsPtr->getCwdProc; if (proc != NULL) { if (fsRecPtr->fsPtr->version != TCL_FILESYSTEM_VERSION_1) { ClientData retCd; TclFSGetCwdProc2 *proc2 = (TclFSGetCwdProc2*)proc; retCd = (*proc2)(NULL); if (retCd != NULL) { Tcl_Obj *norm; /* Looks like a new current directory */ retVal = (*fsRecPtr->fsPtr->internalToNormalizedProc)( retCd); Tcl_IncrRefCount(retVal); norm = TclFSNormalizeAbsolutePath(interp,retVal,NULL); if (norm != NULL) { /* * We found a cwd, which is now in our global * storage. We must make a copy. Norm already has * a refCount of 1. * * Threading issue: note that multiple threads at * system startup could in principle call this * function simultaneously. They will therefore * each set the cwdPathPtr independently. That * behaviour is a bit peculiar, but should be * fine. Once we have a cwd, we'll always be in * the 'else' branch below which is simpler. */ FsUpdateCwd(norm, retCd); Tcl_DecrRefCount(norm); } else { (*fsRecPtr->fsPtr->freeInternalRepProc)(retCd); } Tcl_DecrRefCount(retVal); retVal = NULL; goto cdDidNotChange; } else if (interp != NULL) { Tcl_AppendResult(interp, "error getting working directory name: ", Tcl_PosixError(interp), NULL); } } else { retVal = (*proc)(interp); } } fsRecPtr = fsRecPtr->nextPtr; } /* * Now the 'cwd' may NOT be normalized, at least on some platforms. * For the sake of efficiency, we want a completely normalized cwd at * all times. * * Finally, if retVal is NULL, we do not have a cwd, which could be * problematic. */ if (retVal != NULL) { Tcl_Obj *norm = TclFSNormalizeAbsolutePath(interp, retVal, NULL); if (norm != NULL) { /* * We found a cwd, which is now in our global storage. We must * make a copy. Norm already has a refCount of 1. * * Threading issue: note that multiple threads at system * startup could in principle call this function * simultaneously. They will therefore each set the cwdPathPtr * independently. That behaviour is a bit peculiar, but should * be fine. Once we have a cwd, we'll always be in the 'else' * branch below which is simpler. */ ClientData cd = (ClientData) Tcl_FSGetNativePath(norm); FsUpdateCwd(norm, TclNativeDupInternalRep(cd)); Tcl_DecrRefCount(norm); } Tcl_DecrRefCount(retVal); } } else { /* * We already have a cwd cached, but we want to give the filesystem it * is in a chance to check whether that cwd has changed, or is perhaps * no longer accessible. This allows an error to be thrown if, say, * the permissions on that directory have changed. */ const Tcl_Filesystem *fsPtr = Tcl_FSGetFileSystemForPath(tsdPtr->cwdPathPtr); /* * If the filesystem couldn't be found, or if no cwd function exists * for this filesystem, then we simply assume the cached cwd is ok. * If we do call a cwd, we must watch for errors (if the cwd returns * NULL). This ensures that, say, on Unix if the permissions of the * cwd change, 'pwd' does actually throw the correct error in Tcl. * (This is tested for in the test suite on unix). */ if (fsPtr != NULL) { Tcl_FSGetCwdProc *proc = fsPtr->getCwdProc; ClientData retCd = NULL; if (proc != NULL) { Tcl_Obj *retVal; if (fsPtr->version != TCL_FILESYSTEM_VERSION_1) { TclFSGetCwdProc2 *proc2 = (TclFSGetCwdProc2*)proc; retCd = (*proc2)(tsdPtr->cwdClientData); if (retCd == NULL && interp != NULL) { Tcl_AppendResult(interp, "error getting working directory name: ", Tcl_PosixError(interp), NULL); } if (retCd == tsdPtr->cwdClientData) { goto cdDidNotChange; } /* * Looks like a new current directory. */ retVal = (*fsPtr->internalToNormalizedProc)(retCd); Tcl_IncrRefCount(retVal); } else { retVal = (*proc)(interp); } if (retVal != NULL) { Tcl_Obj *norm = TclFSNormalizeAbsolutePath(interp, retVal, NULL); /* * Check whether cwd has changed from the value previously * stored in cwdPathPtr. Really 'norm' shouldn't be NULL, * but we are careful. */ if (norm == NULL) { /* Do nothing */ if (retCd != NULL) { (*fsPtr->freeInternalRepProc)(retCd); } } else if (norm == tsdPtr->cwdPathPtr) { goto cdEqual; } else { /* * Note that both 'norm' and 'tsdPtr->cwdPathPtr' are * normalized paths. Therefore we can be more * efficient than calling 'Tcl_FSEqualPaths', and in * addition avoid a nasty infinite loop bug when * trying to normalize tsdPtr->cwdPathPtr. */ int len1, len2; char *str1, *str2; str1 = Tcl_GetStringFromObj(tsdPtr->cwdPathPtr, &len1); str2 = Tcl_GetStringFromObj(norm, &len2); if ((len1 == len2) && (strcmp(str1, str2) == 0)) { /* * If the paths were equal, we can be more * efficient and retain the old path object which * will probably already be shared. In this case * we can simply free the normalized path we just * calculated. */ cdEqual: Tcl_DecrRefCount(norm); if (retCd != NULL) { (*fsPtr->freeInternalRepProc)(retCd); } } else { FsUpdateCwd(norm, retCd); Tcl_DecrRefCount(norm); } } Tcl_DecrRefCount(retVal); } else { /* * The 'cwd' function returned an error; reset the cwd. */ FsUpdateCwd(NULL, NULL); } } } } cdDidNotChange: if (tsdPtr->cwdPathPtr != NULL) { Tcl_IncrRefCount(tsdPtr->cwdPathPtr); } return tsdPtr->cwdPathPtr; } /* *---------------------------------------------------------------------- * * Tcl_FSChdir -- * * This function replaces the library version of chdir(). * * The path is normalized and then passed to the filesystem which claims * it. * * Results: * See chdir() documentation. If successful, we keep a record of the * successful path in cwdPathPtr for subsequent calls to getcwd. * * Side effects: * See chdir() documentation. The global cwdPathPtr may change value. * *---------------------------------------------------------------------- */ int Tcl_FSChdir( Tcl_Obj *pathPtr) { const Tcl_Filesystem *fsPtr; int retVal = -1; if (Tcl_FSGetNormalizedPath(NULL, pathPtr) == NULL) { Tcl_SetErrno(ENOENT); return retVal; } fsPtr = Tcl_FSGetFileSystemForPath(pathPtr); if (fsPtr != NULL) { Tcl_FSChdirProc *proc = fsPtr->chdirProc; if (proc != NULL) { /* * If this fails, an appropriate errno will have been stored using * 'Tcl_SetErrno()'. */ retVal = (*proc)(pathPtr); } else { /* * Fallback on stat-based implementation. */ Tcl_StatBuf buf; /* * If the file can be stat'ed and is a directory and is readable, * then we can chdir. If any of these actions fail, then * 'Tcl_SetErrno()' should automatically have been called to set * an appropriate error code */ if ((Tcl_FSStat(pathPtr, &buf) == 0) && (S_ISDIR(buf.st_mode)) && (Tcl_FSAccess(pathPtr, R_OK) == 0)) { /* * We allow the chdir. */ retVal = 0; } } } else { Tcl_SetErrno(ENOENT); } /* * The cwd changed, or an error was thrown. If an error was thrown, we can * just continue (and that will report the error to the user). If there * was no error we must assume that the cwd was actually changed to the * normalized value we calculated above, and we must therefore cache that * information. */ /* * If the filesystem in question has a getCwdProc, then the correct logic * which performs the part below is already part of the Tcl_FSGetCwd() * call, so no need to replicate it again. This will have a side effect * though. The private authoritative representation of the current working * directory stored in cwdPathPtr in static memory will be out-of-sync * with the real OS-maintained value. The first call to Tcl_FSGetCwd will * however recalculate the private copy to match the OS-value so * everything will work right. * * However, if there is no getCwdProc, then we _must_ update our private * storage of the cwd, since this is the only opportunity to do that! * * Note: We currently call this block of code irrespective of whether * there was a getCwdProc or not, but the code should all in principle * work if we only call this block if fsPtr->getCwdProc == NULL. */ if (retVal == 0) { /* * Note that this normalized path may be different to what we found * above (or at least a different object), if the filesystem epoch * changed recently. This can actually happen with scripted documents * very easily. Therefore we ask for the normalized path again (the * correct value will have been cached as a result of the * Tcl_FSGetFileSystemForPath call above anyway). */ Tcl_Obj *normDirName = Tcl_FSGetNormalizedPath(NULL, pathPtr); if (normDirName == NULL) { /* Not really true, but what else to do? */ Tcl_SetErrno(ENOENT); return -1; } if (fsPtr == &tclNativeFilesystem) { /* * For the native filesystem, we keep a cache of the native * representation of the cwd. But, we want to do that for the * exact format that is returned by 'getcwd' (so that we can later * compare the two representations for equality), which might not * be exactly the same char-string as the native representation of * the fully normalized path (e.g. on Windows there's a * forward-slash vs backslash difference). Hence we ask for this * again here. On Unix it might actually be true that we always * have the correct form in the native rep in which case we could * simply use: * cd = Tcl_FSGetNativePath(pathPtr); * instead. This should be examined by someone on Unix. */ ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&tclFsDataKey); ClientData cd; ClientData oldcd = tsdPtr->cwdClientData; /* * Assumption we are using a filesystem version 2. */ TclFSGetCwdProc2 *proc2 = (TclFSGetCwdProc2*)fsPtr->getCwdProc; cd = (*proc2)(oldcd); if (cd != oldcd) { FsUpdateCwd(normDirName, cd); } } else { FsUpdateCwd(normDirName, NULL); } } return retVal; } /* *---------------------------------------------------------------------- * * Tcl_FSLoadFile -- * * Dynamically loads a binary code file into memory and returns the * addresses of two functions within that file, if they are defined. The * appropriate function for the filesystem to which pathPtr belongs will * be called. * * Note that the native filesystem doesn't actually assume 'pathPtr' is a * path. Rather it assumes pathPtr is either a path or just the name * (tail) of a file which can be found somewhere in the environment's * loadable path. This behaviour is not very compatible with virtual * filesystems (and has other problems documented in the load man-page), * so it is advised that full paths are always used. * * Results: * A standard Tcl completion code. If an error occurs, an error message * is left in the interp's result. * * Side effects: * New code suddenly appears in memory. This may later be unloaded by * passing the clientData to the unloadProc. * *---------------------------------------------------------------------- */ int Tcl_FSLoadFile( Tcl_Interp *interp, /* Used for error reporting. */ Tcl_Obj *pathPtr, /* Name of the file containing the desired * code. */ const char *sym1, const char *sym2, /* Names of two functions to look up in the * file's symbol table. */ Tcl_PackageInitProc **proc1Ptr, Tcl_PackageInitProc **proc2Ptr, /* Where to return the addresses corresponding * to sym1 and sym2. */ Tcl_LoadHandle *handlePtr, /* Filled with token for dynamically loaded * file which will be passed back to * (*unloadProcPtr)() to unload the file. */ Tcl_FSUnloadFileProc **unloadProcPtr) /* Filled with address of Tcl_FSUnloadFileProc * function which should be used for this * file. */ { const char *symbols[2]; Tcl_PackageInitProc **procPtrs[2]; ClientData clientData; int res; /* * Initialize the arrays. */ symbols[0] = sym1; symbols[1] = sym2; procPtrs[0] = proc1Ptr; procPtrs[1] = proc2Ptr; /* * Perform the load. */ res = TclLoadFile(interp, pathPtr, 2, symbols, procPtrs, handlePtr, &clientData, unloadProcPtr); /* * Due to an unfortunate mis-design in Tcl 8.4 fs, when loading a shared * library, we don't keep the loadHandle (for TclpFindSymbol) and the * clientData (for the unloadProc) separately. In fact we effectively * throw away the loadHandle and only use the clientData. It just so * happens, for the native filesystem only, that these two are identical. * * This also means that the signatures Tcl_FSUnloadFileProc and * Tcl_FSLoadFileProc are both misleading. */ *handlePtr = (Tcl_LoadHandle) clientData; return res; } /* *---------------------------------------------------------------------- * * TclLoadFile -- * * Dynamically loads a binary code file into memory and returns the * addresses of a number of given functions within that file, if they are * defined. The appropriate function for the filesystem to which pathPtr * belongs will be called. * * Note that the native filesystem doesn't actually assume 'pathPtr' is a * path. Rather it assumes pathPtr is either a path or just the name * (tail) of a file which can be found somewhere in the environment's * loadable path. This behaviour is not very compatible with virtual * filesystems (and has other problems documented in the load man-page), * so it is advised that full paths are always used. * * This function is currently private to Tcl. It may be exported in the * future and its interface fixed (but we should clean up the * loadHandle/clientData confusion at that time -- see the above comments * in Tcl_FSLoadFile for details). For a public function, see * Tcl_FSLoadFile. * * Results: * A standard Tcl completion code. If an error occurs, an error message * is left in the interp's result. * * Side effects: * New code suddenly appears in memory. This may later be unloaded by * passing the clientData to the unloadProc. * *---------------------------------------------------------------------- */ int TclLoadFile( Tcl_Interp *interp, /* Used for error reporting. */ Tcl_Obj *pathPtr, /* Name of the file containing the desired * code. */ int symc, /* Number of symbols/procPtrs in the next two * arrays. */ const char *symbols[], /* Names of functions to look up in the file's * symbol table. */ Tcl_PackageInitProc **procPtrs[], /* Where to return the addresses corresponding * to symbols[]. */ Tcl_LoadHandle *handlePtr, /* Filled with token for shared library * information which can be used in * TclpFindSymbol. */ ClientData *clientDataPtr, /* Filled with token for dynamically loaded * file which will be passed back to * (*unloadProcPtr)() to unload the file. */ Tcl_FSUnloadFileProc **unloadProcPtr) /* Filled with address of Tcl_FSUnloadFileProc * function which should be used for this * file. */ { const Tcl_Filesystem *fsPtr = Tcl_FSGetFileSystemForPath(pathPtr); Tcl_FSLoadFileProc *proc; Tcl_Filesystem *copyFsPtr; Tcl_Obj *copyToPtr; Tcl_LoadHandle newLoadHandle = NULL; ClientData newClientData = NULL; Tcl_FSUnloadFileProc *newUnloadProcPtr = NULL; FsDivertLoad *tvdlPtr; int retVal; if (fsPtr == NULL) { Tcl_SetErrno(ENOENT); return TCL_ERROR; } proc = fsPtr->loadFileProc; if (proc != NULL) { int retVal = (*proc)(interp, pathPtr, handlePtr, unloadProcPtr); if (retVal == TCL_OK) { if (*handlePtr == NULL) { return TCL_ERROR; } /* * Copy this across, since both are equal for the native fs. */ *clientDataPtr = (ClientData)*handlePtr; Tcl_ResetResult(interp); goto resolveSymbols; } if (Tcl_GetErrno() != EXDEV) { return retVal; } } /* * The filesystem doesn't support 'load', so we fall back on the following * technique: * * First check if it is readable -- and exists! */ if (Tcl_FSAccess(pathPtr, R_OK) != 0) { Tcl_AppendResult(interp, "couldn't load library \"", Tcl_GetString(pathPtr), "\": ", Tcl_PosixError(interp), NULL); return TCL_ERROR; } #ifdef TCL_LOAD_FROM_MEMORY /* * The platform supports loading code from memory, so ask for a buffer of * the appropriate size, read the file into it and load the code from the * buffer: */ { int ret, size; void *buffer; Tcl_StatBuf statBuf; Tcl_Channel data; ret = Tcl_FSStat(pathPtr, &statBuf); if (ret < 0) { goto mustCopyToTempAnyway; } size = (int) statBuf.st_size; /* * Tcl_Read takes an int: check that file size isn't wide. */ if (size != (Tcl_WideInt) statBuf.st_size) { goto mustCopyToTempAnyway; } data = Tcl_FSOpenFileChannel(interp, pathPtr, "rb", 0666); if (!data) { goto mustCopyToTempAnyway; } buffer = TclpLoadMemoryGetBuffer(interp, size); if (!buffer) { Tcl_Close(interp, data); goto mustCopyToTempAnyway; } ret = Tcl_Read(data, buffer, size); Tcl_Close(interp, data); ret = TclpLoadMemory(interp, buffer, size, ret, handlePtr, unloadProcPtr); if (ret == TCL_OK && *handlePtr != NULL) { *clientDataPtr = (ClientData) *handlePtr; goto resolveSymbols; } } mustCopyToTempAnyway: Tcl_ResetResult(interp); #endif /* * Get a temporary filename to use, first to copy the file into, and then * to load. */ copyToPtr = TclpTempFileName(); if (copyToPtr == NULL) { Tcl_AppendResult(interp, "couldn't create temporary file: ", Tcl_PosixError(interp), NULL); return TCL_ERROR; } Tcl_IncrRefCount(copyToPtr); copyFsPtr = Tcl_FSGetFileSystemForPath(copyToPtr); if ((copyFsPtr == NULL) || (copyFsPtr == fsPtr)) { /* * We already know we can't use Tcl_FSLoadFile from this filesystem, * and we must avoid a possible infinite loop. Try to delete the file * we probably created, and then exit. */ Tcl_FSDeleteFile(copyToPtr); Tcl_DecrRefCount(copyToPtr); Tcl_AppendResult(interp, "couldn't load from current filesystem",NULL); return TCL_ERROR; } if (TclCrossFilesystemCopy(interp, pathPtr, copyToPtr) != TCL_OK) { /* * Cross-platform copy failed. */ Tcl_FSDeleteFile(copyToPtr); Tcl_DecrRefCount(copyToPtr); return TCL_ERROR; } #if !defined(__WIN32__) /* * Do we need to set appropriate permissions on the file? This may be * required on some systems. On Unix we could loop over the file * attributes, and set any that are called "-permissions" to 0700. However * we just do this directly, like this: */ { int index; Tcl_Obj *perm; TclNewLiteralStringObj(perm, "0700"); Tcl_IncrRefCount(perm); if (TclFSFileAttrIndex(copyToPtr, "-permissions", &index) == TCL_OK) { Tcl_FSFileAttrsSet(NULL, index, copyToPtr, perm); } Tcl_DecrRefCount(perm); } #endif /* * We need to reset the result now, because the cross-filesystem copy may * have stored the number of bytes in the result. */ Tcl_ResetResult(interp); retVal = TclLoadFile(interp, copyToPtr, symc, symbols, procPtrs, &newLoadHandle, &newClientData, &newUnloadProcPtr); if (retVal != TCL_OK) { /* * The file didn't load successfully. */ Tcl_FSDeleteFile(copyToPtr); Tcl_DecrRefCount(copyToPtr); return retVal; } /* * Try to delete the file immediately - this is possible in some OSes, and * avoids any worries about leaving the copy laying around on exit. */ if (Tcl_FSDeleteFile(copyToPtr) == TCL_OK) { Tcl_DecrRefCount(copyToPtr); /* * We tell our caller about the real shared library which was loaded. * Note that this does mean that the package list maintained by 'load' * will store the original (vfs) path alongside the temporary load * handle and unload proc ptr. */ (*handlePtr) = newLoadHandle; (*clientDataPtr) = newClientData; (*unloadProcPtr) = newUnloadProcPtr; Tcl_ResetResult(interp); return TCL_OK; } /* * When we unload this file, we need to divert the unloading so we can * unload and cleanup the temporary file correctly. */ tvdlPtr = (FsDivertLoad *) ckalloc(sizeof(FsDivertLoad)); /* * Remember three pieces of information. This allows us to cleanup the * diverted load completely, on platforms which allow proper unloading of * code. */ tvdlPtr->loadHandle = newLoadHandle; tvdlPtr->unloadProcPtr = newUnloadProcPtr; if (copyFsPtr != &tclNativeFilesystem) { /* * copyToPtr is already incremented for this reference. */ tvdlPtr->divertedFile = copyToPtr; /* * This is the filesystem we loaded it into. Since we have a reference * to 'copyToPtr', we already have a refCount on this filesystem, so * we don't need to worry about it disappearing on us. */ tvdlPtr->divertedFilesystem = copyFsPtr; tvdlPtr->divertedFileNativeRep = NULL; } else { /* * We need the native rep. */ tvdlPtr->divertedFileNativeRep = TclNativeDupInternalRep( Tcl_FSGetInternalRep(copyToPtr, copyFsPtr)); /* * We don't need or want references to the copied Tcl_Obj or the * filesystem if it is the native one. */ tvdlPtr->divertedFile = NULL; tvdlPtr->divertedFilesystem = NULL; Tcl_DecrRefCount(copyToPtr); } copyToPtr = NULL; (*handlePtr) = newLoadHandle; (*clientDataPtr) = (ClientData) tvdlPtr; (*unloadProcPtr) = TclFSUnloadTempFile; Tcl_ResetResult(interp); return retVal; resolveSymbols: { int i; for (i=0 ; iunloadProcPtr != NULL) { (*tvdlPtr->unloadProcPtr)(tvdlPtr->loadHandle); } if (tvdlPtr->divertedFilesystem == NULL) { /* * It was the native filesystem, and we have a special function * available just for this purpose, which we know works even at this * late stage. */ TclpDeleteFile(tvdlPtr->divertedFileNativeRep); NativeFreeInternalRep(tvdlPtr->divertedFileNativeRep); } else { /* * Remove the temporary file we created. Note, we may crash here * because encodings have been taken down already. */ if (tvdlPtr->divertedFilesystem->deleteFileProc(tvdlPtr->divertedFile) != TCL_OK) { /* * The above may have failed because the filesystem, or something * it depends upon (e.g. encodings) have been taken down because * Tcl is exiting. * * We may need to work out how to delete this file more robustly * (or give the filesystem the information it needs to delete the * file more robustly). * * In particular, one problem might be that the filesystem cannot * extract the information it needs from the above path object * because Tcl's entire filesystem apparatus (the code in this * file) has been finalized, and it refuses to pass the internal * representation to the filesystem. */ } /* * And free up the allocations. This will also of course remove a * refCount from the Tcl_Filesystem to which this file belongs, which * could then free up the filesystem if we are exiting. */ Tcl_DecrRefCount(tvdlPtr->divertedFile); } ckfree((char*)tvdlPtr); } /* *--------------------------------------------------------------------------- * * Tcl_FSLink -- * * This function replaces the library version of readlink() and can also * be used to make links. The appropriate function for the filesystem to * which pathPtr belongs will be called. * * Results: * If toPtr is NULL, then the result is a Tcl_Obj specifying the contents * of the symbolic link given by 'pathPtr', or NULL if the symbolic link * could not be read. The result is owned by the caller, which should * call Tcl_DecrRefCount when the result is no longer needed. * * If toPtr is non-NULL, then the result is toPtr if the link action was * successful, or NULL if not. In this case the result has no additional * reference count, and need not be freed. The actual action to perform * is given by the 'linkAction' flags, which is an or'd combination of: * * TCL_CREATE_SYMBOLIC_LINK * TCL_CREATE_HARD_LINK * * Note that most filesystems will not support linking across to * different filesystems, so this function will usually fail unless toPtr * is in the same FS as pathPtr. * * Side effects: * See readlink() documentation. A new filesystem link object may appear. * *--------------------------------------------------------------------------- */ Tcl_Obj * Tcl_FSLink( Tcl_Obj *pathPtr, /* Path of file to readlink or link */ Tcl_Obj *toPtr, /* NULL or path to be linked to */ int linkAction) /* Action to perform */ { const Tcl_Filesystem *fsPtr = Tcl_FSGetFileSystemForPath(pathPtr); if (fsPtr != NULL) { Tcl_FSLinkProc *proc = fsPtr->linkProc; if (proc != NULL) { return (*proc)(pathPtr, toPtr, linkAction); } } /* * If S_IFLNK isn't defined it means that the machine doesn't support * symbolic links, so the file can't possibly be a symbolic link. Generate * an EINVAL error, which is what happens on machines that do support * symbolic links when you invoke readlink on a file that isn't a symbolic * link. */ #ifndef S_IFLNK errno = EINVAL; #else Tcl_SetErrno(ENOENT); #endif /* S_IFLNK */ return NULL; } /* *--------------------------------------------------------------------------- * * Tcl_FSListVolumes -- * * Lists the currently mounted volumes. The chain of functions that have * been "inserted" into the filesystem will be called in succession; each * may return a list of volumes, all of which are added to the result * until all mounted file systems are listed. * * Notice that we assume the lists returned by each filesystem (if non * NULL) have been given a refCount for us already. However, we are NOT * allowed to hang on to the list itself (it belongs to the filesystem we * called). Therefore we quite naturally add its contents to the result * we are building, and then decrement the refCount. * * Results: * The list of volumes, in an object which has refCount 0. * * Side effects: * None * *--------------------------------------------------------------------------- */ Tcl_Obj* Tcl_FSListVolumes(void) { FilesystemRecord *fsRecPtr; Tcl_Obj *resultPtr = Tcl_NewObj(); /* * Call each of the "listVolumes" function in succession. A non-NULL * return value indicates the particular function has succeeded. We call * all the functions registered, since we want a list of all drives from * all filesystems. */ fsRecPtr = FsGetFirstFilesystem(); while (fsRecPtr != NULL) { Tcl_FSListVolumesProc *proc = fsRecPtr->fsPtr->listVolumesProc; if (proc != NULL) { Tcl_Obj *thisFsVolumes = (*proc)(); if (thisFsVolumes != NULL) { Tcl_ListObjAppendList(NULL, resultPtr, thisFsVolumes); Tcl_DecrRefCount(thisFsVolumes); } } fsRecPtr = fsRecPtr->nextPtr; } return resultPtr; } /* *--------------------------------------------------------------------------- * * FsListMounts -- * * List all mounts within the given directory, which match the given * pattern. * * Results: * The list of mounts, in a list object which has refCount 0, or NULL if * we didn't even find any filesystems to try to list mounts. * * Side effects: * None * *--------------------------------------------------------------------------- */ static Tcl_Obj * FsListMounts( Tcl_Obj *pathPtr, /* Contains path to directory to search. */ const char *pattern) /* Pattern to match against. */ { FilesystemRecord *fsRecPtr; Tcl_GlobTypeData mountsOnly = { TCL_GLOB_TYPE_MOUNT, 0, NULL, NULL }; Tcl_Obj *resultPtr = NULL; /* * Call each of the "matchInDirectory" functions in succession, with the * specific type information 'mountsOnly'. A non-NULL return value * indicates the particular function has succeeded. We call all the * functions registered, since we want a list from each filesystems. */ fsRecPtr = FsGetFirstFilesystem(); while (fsRecPtr != NULL) { if (fsRecPtr->fsPtr != &tclNativeFilesystem) { Tcl_FSMatchInDirectoryProc *proc = fsRecPtr->fsPtr->matchInDirectoryProc; if (proc != NULL) { if (resultPtr == NULL) { resultPtr = Tcl_NewObj(); } (*proc)(NULL, resultPtr, pathPtr, pattern, &mountsOnly); } } fsRecPtr = fsRecPtr->nextPtr; } return resultPtr; } /* *--------------------------------------------------------------------------- * * Tcl_FSSplitPath -- * * This function takes the given Tcl_Obj, which should be a valid path, * and returns a Tcl List object containing each segment of that path as * an element. * * Results: * Returns list object with refCount of zero. If the passed in lenPtr is * non-NULL, we use it to return the number of elements in the returned * list. * * Side effects: * None. * *--------------------------------------------------------------------------- */ Tcl_Obj * Tcl_FSSplitPath( Tcl_Obj *pathPtr, /* Path to split. */ int *lenPtr) /* int to store number of path elements. */ { Tcl_Obj *result = NULL; /* Needed only to prevent gcc warnings. */ Tcl_Filesystem *fsPtr; char separator = '/'; int driveNameLength; char *p; /* * Perform platform specific splitting. */ if (TclFSGetPathType(pathPtr, &fsPtr, &driveNameLength) == TCL_PATH_ABSOLUTE) { if (fsPtr == &tclNativeFilesystem) { return TclpNativeSplitPath(pathPtr, lenPtr); } } else { return TclpNativeSplitPath(pathPtr, lenPtr); } /* * We assume separators are single characters. */ if (fsPtr->filesystemSeparatorProc != NULL) { Tcl_Obj *sep = (*fsPtr->filesystemSeparatorProc)(pathPtr); if (sep != NULL) { Tcl_IncrRefCount(sep); separator = Tcl_GetString(sep)[0]; Tcl_DecrRefCount(sep); } } /* * Place the drive name as first element of the result list. The drive * name may contain strange characters, like colons and multiple forward * slashes (for example 'ftp://' is a valid vfs drive name) */ result = Tcl_NewObj(); p = Tcl_GetString(pathPtr); Tcl_ListObjAppendElement(NULL, result, Tcl_NewStringObj(p, driveNameLength)); p += driveNameLength; /* * Add the remaining path elements to the list. */ for (;;) { char *elementStart = p; int length; while ((*p != '\0') && (*p != separator)) { p++; } length = p - elementStart; if (length > 0) { Tcl_Obj *nextElt; if (elementStart[0] == '~') { TclNewLiteralStringObj(nextElt, "./"); Tcl_AppendToObj(nextElt, elementStart, length); } else { nextElt = Tcl_NewStringObj(elementStart, length); } Tcl_ListObjAppendElement(NULL, result, nextElt); } if (*p++ == '\0') { break; } } /* * Compute the number of elements in the result. */ if (lenPtr != NULL) { TclListObjLength(NULL, result, lenPtr); } return result; } /* Simple helper function */ Tcl_Obj * TclFSInternalToNormalized( Tcl_Filesystem *fromFilesystem, ClientData clientData, FilesystemRecord **fsRecPtrPtr) { FilesystemRecord *fsRecPtr = FsGetFirstFilesystem(); while (fsRecPtr != NULL) { if (fsRecPtr->fsPtr == fromFilesystem) { *fsRecPtrPtr = fsRecPtr; break; } fsRecPtr = fsRecPtr->nextPtr; } if ((fsRecPtr != NULL) && (fromFilesystem->internalToNormalizedProc != NULL)) { return (*fromFilesystem->internalToNormalizedProc)(clientData); } else { return NULL; } } /* *---------------------------------------------------------------------- * * TclGetPathType -- * * Helper function used by FSGetPathType. * * Results: * Returns one of TCL_PATH_ABSOLUTE, TCL_PATH_RELATIVE, or * TCL_PATH_VOLUME_RELATIVE. The filesystem reference will be set if and * only if it is non-NULL and the function's return value is * TCL_PATH_ABSOLUTE. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_PathType TclGetPathType( Tcl_Obj *pathPtr, /* Path to determine type for */ Tcl_Filesystem **filesystemPtrPtr, /* If absolute path and this is not NULL, then * set to the filesystem which claims this * path. */ int *driveNameLengthPtr, /* If the path is absolute, and this is * non-NULL, then set to the length of the * driveName. */ Tcl_Obj **driveNameRef) /* If the path is absolute, and this is * non-NULL, then set to the name of the * drive, network-volume which contains the * path, already with a refCount for the * caller. */ { int pathLen; char *path; Tcl_PathType type; path = Tcl_GetStringFromObj(pathPtr, &pathLen); type = TclFSNonnativePathType(path, pathLen, filesystemPtrPtr, driveNameLengthPtr, driveNameRef); if (type != TCL_PATH_ABSOLUTE) { type = TclpGetNativePathType(pathPtr, driveNameLengthPtr, driveNameRef); if ((type == TCL_PATH_ABSOLUTE) && (filesystemPtrPtr != NULL)) { *filesystemPtrPtr = &tclNativeFilesystem; } } return type; } /* *---------------------------------------------------------------------- * * TclFSNonnativePathType -- * * Helper function used by TclGetPathType. Its purpose is to check * whether the given path starts with a string which corresponds to a * file volume in any registered filesystem except the native one. For * speed and historical reasons the native filesystem has special * hard-coded checks dotted here and there in the filesystem code. * * Results: * Returns one of TCL_PATH_ABSOLUTE or TCL_PATH_RELATIVE. The filesystem * reference will be set if and only if it is non-NULL and the function's * return value is TCL_PATH_ABSOLUTE. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_PathType TclFSNonnativePathType( const char *path, /* Path to determine type for */ int pathLen, /* Length of the path */ Tcl_Filesystem **filesystemPtrPtr, /* If absolute path and this is not NULL, then * set to the filesystem which claims this * path. */ int *driveNameLengthPtr, /* If the path is absolute, and this is * non-NULL, then set to the length of the * driveName. */ Tcl_Obj **driveNameRef) /* If the path is absolute, and this is * non-NULL, then set to the name of the * drive, network-volume which contains the * path, already with a refCount for the * caller. */ { FilesystemRecord *fsRecPtr; Tcl_PathType type = TCL_PATH_RELATIVE; /* * Call each of the "listVolumes" function in succession, checking whether * the given path is an absolute path on any of the volumes returned (this * is done by checking whether the path's prefix matches). */ fsRecPtr = FsGetFirstFilesystem(); while (fsRecPtr != NULL) { Tcl_FSListVolumesProc *proc = fsRecPtr->fsPtr->listVolumesProc; /* * We want to skip the native filesystem in this loop because * otherwise we won't necessarily pass all the Tcl testsuite -- this * is because some of the tests artificially change the current * platform (between win, unix) but the list of volumes we get by * calling (*proc) will reflect the current (real) platform only and * this may cause some tests to fail. In particular, on unix '/' will * match the beginning of certain absolute Windows paths starting '//' * and those tests will go wrong. * * Besides these test-suite issues, there is one other reason to skip * the native filesystem --- since the tclFilename.c code has nice * fast 'absolute path' checkers, we don't want to waste time * repeating that effort here, and this function is actually called * quite often, so if we can save the overhead of the native * filesystem returning us a list of volumes all the time, it is * better. */ if ((fsRecPtr->fsPtr != &tclNativeFilesystem) && (proc != NULL)) { int numVolumes; Tcl_Obj *thisFsVolumes = (*proc)(); if (thisFsVolumes != NULL) { if (Tcl_ListObjLength(NULL, thisFsVolumes, &numVolumes) != TCL_OK) { /* * This is VERY bad; the Tcl_FSListVolumesProc didn't * return a valid list. Set numVolumes to -1 so that we * skip the while loop below and just return with the * current value of 'type'. * * It would be better if we could signal an error here * (but Tcl_Panic seems a bit excessive). */ numVolumes = -1; } while (numVolumes > 0) { Tcl_Obj *vol; int len; char *strVol; numVolumes--; Tcl_ListObjIndex(NULL, thisFsVolumes, numVolumes, &vol); strVol = Tcl_GetStringFromObj(vol,&len); if (pathLen < len) { continue; } if (strncmp(strVol, path, (size_t) len) == 0) { type = TCL_PATH_ABSOLUTE; if (filesystemPtrPtr != NULL) { *filesystemPtrPtr = fsRecPtr->fsPtr; } if (driveNameLengthPtr != NULL) { *driveNameLengthPtr = len; } if (driveNameRef != NULL) { *driveNameRef = vol; Tcl_IncrRefCount(vol); } break; } } Tcl_DecrRefCount(thisFsVolumes); if (type == TCL_PATH_ABSOLUTE) { /* * We don't need to examine any more filesystems. */ break; } } } fsRecPtr = fsRecPtr->nextPtr; } return type; } /* *--------------------------------------------------------------------------- * * Tcl_FSRenameFile -- * * If the two paths given belong to the same filesystem, we call that * filesystems rename function. Otherwise we simply return the POSIX * error 'EXDEV', and -1. * * Results: * Standard Tcl error code if a function was called. * * Side effects: * A file may be renamed. * *--------------------------------------------------------------------------- */ int Tcl_FSRenameFile( Tcl_Obj* srcPathPtr, /* Pathname of file or dir to be renamed * (UTF-8). */ Tcl_Obj *destPathPtr) /* New pathname of file or directory * (UTF-8). */ { int retVal = -1; const Tcl_Filesystem *fsPtr, *fsPtr2; fsPtr = Tcl_FSGetFileSystemForPath(srcPathPtr); fsPtr2 = Tcl_FSGetFileSystemForPath(destPathPtr); if ((fsPtr == fsPtr2) && (fsPtr != NULL)) { Tcl_FSRenameFileProc *proc = fsPtr->renameFileProc; if (proc != NULL) { retVal = (*proc)(srcPathPtr, destPathPtr); } } if (retVal == -1) { Tcl_SetErrno(EXDEV); } return retVal; } /* *--------------------------------------------------------------------------- * * Tcl_FSCopyFile -- * * If the two paths given belong to the same filesystem, we call that * filesystem's copy function. Otherwise we simply return the POSIX error * 'EXDEV', and -1. * * Note that in the native filesystems, 'copyFileProc' is defined to copy * soft links (i.e. it copies the links themselves, not the things they * point to). * * Results: * Standard Tcl error code if a function was called. * * Side effects: * A file may be copied. * *--------------------------------------------------------------------------- */ int Tcl_FSCopyFile( Tcl_Obj *srcPathPtr, /* Pathname of file to be copied (UTF-8). */ Tcl_Obj *destPathPtr) /* Pathname of file to copy to (UTF-8). */ { int retVal = -1; const Tcl_Filesystem *fsPtr, *fsPtr2; fsPtr = Tcl_FSGetFileSystemForPath(srcPathPtr); fsPtr2 = Tcl_FSGetFileSystemForPath(destPathPtr); if (fsPtr == fsPtr2 && fsPtr != NULL) { Tcl_FSCopyFileProc *proc = fsPtr->copyFileProc; if (proc != NULL) { retVal = (*proc)(srcPathPtr, destPathPtr); } } if (retVal == -1) { Tcl_SetErrno(EXDEV); } return retVal; } /* *--------------------------------------------------------------------------- * * TclCrossFilesystemCopy -- * * Helper for above function, and for Tcl_FSLoadFile, to copy files from * one filesystem to another. This function will overwrite the target * file if it already exists. * * Results: * Standard Tcl error code. * * Side effects: * A file may be created. * *--------------------------------------------------------------------------- */ int TclCrossFilesystemCopy( Tcl_Interp *interp, /* For error messages */ Tcl_Obj *source, /* Pathname of file to be copied (UTF-8). */ Tcl_Obj *target) /* Pathname of file to copy to (UTF-8). */ { int result = TCL_ERROR; int prot = 0666; Tcl_Channel in, out; Tcl_StatBuf sourceStatBuf; struct utimbuf tval; out = Tcl_FSOpenFileChannel(interp, target, "wb", prot); if (out == NULL) { /* * It looks like we cannot copy it over. Bail out... */ goto done; } in = Tcl_FSOpenFileChannel(interp, source, "rb", prot); if (in == NULL) { /* * This is very strange, caller should have checked this... */ Tcl_Close(interp, out); goto done; } /* * Copy it synchronously. We might wish to add an asynchronous option to * support vfs's which are slow (e.g. network sockets). */ if (TclCopyChannel(interp, in, out, -1, NULL) == TCL_OK) { result = TCL_OK; } /* * If the copy failed, assume that copy channel left a good error message. */ Tcl_Close(interp, in); Tcl_Close(interp, out); /* * Set modification date of copied file. */ if (Tcl_FSLstat(source, &sourceStatBuf) == 0) { tval.actime = sourceStatBuf.st_atime; tval.modtime = sourceStatBuf.st_mtime; Tcl_FSUtime(target, &tval); } done: return result; } /* *--------------------------------------------------------------------------- * * Tcl_FSDeleteFile -- * * The appropriate function for the filesystem to which pathPtr belongs * will be called. * * Results: * Standard Tcl error code. * * Side effects: * A file may be deleted. * *--------------------------------------------------------------------------- */ int Tcl_FSDeleteFile( Tcl_Obj *pathPtr) /* Pathname of file to be removed (UTF-8). */ { const Tcl_Filesystem *fsPtr = Tcl_FSGetFileSystemForPath(pathPtr); if (fsPtr != NULL) { Tcl_FSDeleteFileProc *proc = fsPtr->deleteFileProc; if (proc != NULL) { return (*proc)(pathPtr); } } Tcl_SetErrno(ENOENT); return -1; } /* *--------------------------------------------------------------------------- * * Tcl_FSCreateDirectory -- * * The appropriate function for the filesystem to which pathPtr belongs * will be called. * * Results: * Standard Tcl error code. * * Side effects: * A directory may be created. * *--------------------------------------------------------------------------- */ int Tcl_FSCreateDirectory( Tcl_Obj *pathPtr) /* Pathname of directory to create (UTF-8). */ { const Tcl_Filesystem *fsPtr = Tcl_FSGetFileSystemForPath(pathPtr); if (fsPtr != NULL) { Tcl_FSCreateDirectoryProc *proc = fsPtr->createDirectoryProc; if (proc != NULL) { return (*proc)(pathPtr); } } Tcl_SetErrno(ENOENT); return -1; } /* *--------------------------------------------------------------------------- * * Tcl_FSCopyDirectory -- * * If the two paths given belong to the same filesystem, we call that * filesystems copy-directory function. Otherwise we simply return the * POSIX error 'EXDEV', and -1. * * Results: * Standard Tcl error code if a function was called. * * Side effects: * A directory may be copied. * *--------------------------------------------------------------------------- */ int Tcl_FSCopyDirectory( Tcl_Obj* srcPathPtr, /* Pathname of directory to be copied * (UTF-8). */ Tcl_Obj *destPathPtr, /* Pathname of target directory (UTF-8). */ Tcl_Obj **errorPtr) /* If non-NULL, then will be set to a new * object containing name of file causing * error, with refCount 1. */ { int retVal = -1; const Tcl_Filesystem *fsPtr, *fsPtr2; fsPtr = Tcl_FSGetFileSystemForPath(srcPathPtr); fsPtr2 = Tcl_FSGetFileSystemForPath(destPathPtr); if (fsPtr == fsPtr2 && fsPtr != NULL) { Tcl_FSCopyDirectoryProc *proc = fsPtr->copyDirectoryProc; if (proc != NULL) { retVal = (*proc)(srcPathPtr, destPathPtr, errorPtr); } } if (retVal == -1) { Tcl_SetErrno(EXDEV); } return retVal; } /* *--------------------------------------------------------------------------- * * Tcl_FSRemoveDirectory -- * * The appropriate function for the filesystem to which pathPtr belongs * will be called. * * Results: * Standard Tcl error code. * * Side effects: * A directory may be deleted. * *--------------------------------------------------------------------------- */ int Tcl_FSRemoveDirectory( Tcl_Obj *pathPtr, /* Pathname of directory to be removed * (UTF-8). */ int recursive, /* If non-zero, removes directories that are * nonempty. Otherwise, will only remove empty * directories. */ Tcl_Obj **errorPtr) /* If non-NULL, then will be set to a new * object containing name of file causing * error, with refCount 1. */ { const Tcl_Filesystem *fsPtr = Tcl_FSGetFileSystemForPath(pathPtr); if (fsPtr != NULL && fsPtr->removeDirectoryProc != NULL) { Tcl_FSRemoveDirectoryProc *proc = fsPtr->removeDirectoryProc; if (recursive) { /* * We check whether the cwd lies inside this directory and move it * if it does. */ Tcl_Obj *cwdPtr = Tcl_FSGetCwd(NULL); if (cwdPtr != NULL) { char *cwdStr, *normPathStr; int cwdLen, normLen; Tcl_Obj *normPath = Tcl_FSGetNormalizedPath(NULL, pathPtr); if (normPath != NULL) { normPathStr = Tcl_GetStringFromObj(normPath, &normLen); cwdStr = Tcl_GetStringFromObj(cwdPtr, &cwdLen); if ((cwdLen >= normLen) && (strncmp(normPathStr, cwdStr, (size_t) normLen) == 0)) { /* * The cwd is inside the directory, so we perform a * 'cd [file dirname $path]'. */ Tcl_Obj *dirPtr = TclPathPart(NULL, pathPtr, TCL_PATH_DIRNAME); Tcl_FSChdir(dirPtr); Tcl_DecrRefCount(dirPtr); } } Tcl_DecrRefCount(cwdPtr); } } return (*proc)(pathPtr, recursive, errorPtr); } Tcl_SetErrno(ENOENT); return -1; } /* *--------------------------------------------------------------------------- * * Tcl_FSGetFileSystemForPath -- * * This function determines which filesystem to use for a particular path * object, and returns the filesystem which accepts this file. If no * filesystem will accept this object as a valid file path, then NULL is * returned. * * Results: * NULL or a filesystem which will accept this path. * * Side effects: * The object may be converted to a path type. * *--------------------------------------------------------------------------- */ Tcl_Filesystem * Tcl_FSGetFileSystemForPath( Tcl_Obj* pathPtr) { FilesystemRecord *fsRecPtr; Tcl_Filesystem* retVal = NULL; if (pathPtr == NULL) { Tcl_Panic("Tcl_FSGetFileSystemForPath called with NULL object"); return NULL; } /* * If the object has a refCount of zero, we reject it. This is to avoid * possible segfaults or nondeterministic memory leaks (i.e. the user * doesn't know if they should decrement the ref count on return or not). */ if (pathPtr->refCount == 0) { Tcl_Panic("Tcl_FSGetFileSystemForPath called with object with refCount == 0"); return NULL; } /* * Check if the filesystem has changed in some way since this object's * internal representation was calculated. Before doing that, assure we * have the most up-to-date copy of the master filesystem. This is * accomplished by the FsGetFirstFilesystem() call. */ fsRecPtr = FsGetFirstFilesystem(); if (TclFSEnsureEpochOk(pathPtr, &retVal) != TCL_OK) { return NULL; } /* * Call each of the "pathInFilesystem" functions in succession. A * non-return value of -1 indicates the particular function has succeeded. */ while ((retVal == NULL) && (fsRecPtr != NULL)) { Tcl_FSPathInFilesystemProc *proc = fsRecPtr->fsPtr->pathInFilesystemProc; if (proc != NULL) { ClientData clientData = NULL; if ((*proc)(pathPtr, &clientData) != -1) { /* * We assume the type of pathPtr hasn't been changed by the * above call to the pathInFilesystemProc. */ TclFSSetPathDetails(pathPtr, fsRecPtr, clientData); retVal = fsRecPtr->fsPtr; } } fsRecPtr = fsRecPtr->nextPtr; } return retVal; } /* *--------------------------------------------------------------------------- * * Tcl_FSGetNativePath -- * * This function is for use by the Win/Unix native filesystems, so that * they can easily retrieve the native (char* or TCHAR*) representation * of a path. Other filesystems will probably want to implement similar * functions. They basically act as a safety net around * Tcl_FSGetInternalRep. Normally your file-system functions will always * be called with path objects already converted to the correct * filesystem, but if for some reason they are called directly (i.e. by * functions not in this file), then one cannot necessarily guarantee * that the path object pointer is from the correct filesystem. * * Note: in the future it might be desireable to have separate versions * of this function with different signatures, for example * Tcl_FSGetNativeWinPath, Tcl_FSGetNativeUnixPath etc. Right now, since * native paths are all string based, we use just one function. * * Results: * NULL or a valid native path. * * Side effects: * See Tcl_FSGetInternalRep. * *--------------------------------------------------------------------------- */ const char * Tcl_FSGetNativePath( Tcl_Obj *pathPtr) { return (const char *) Tcl_FSGetInternalRep(pathPtr, &tclNativeFilesystem); } /* *--------------------------------------------------------------------------- * * NativeFreeInternalRep -- * * Free a native internal representation, which will be non-NULL. * * Results: * None. * * Side effects: * Memory is released. * *--------------------------------------------------------------------------- */ static void NativeFreeInternalRep( ClientData clientData) { ckfree((char *) clientData); } /* *--------------------------------------------------------------------------- * * Tcl_FSFileSystemInfo -- * * This function returns a list of two elements. The first element is the * name of the filesystem (e.g. "native" or "vfs"), and the second is the * particular type of the given path within that filesystem. * * Results: * A list of two elements. * * Side effects: * The object may be converted to a path type. * *--------------------------------------------------------------------------- */ Tcl_Obj * Tcl_FSFileSystemInfo( Tcl_Obj *pathPtr) { Tcl_Obj *resPtr; Tcl_FSFilesystemPathTypeProc *proc; const Tcl_Filesystem *fsPtr = Tcl_FSGetFileSystemForPath(pathPtr); if (fsPtr == NULL) { return NULL; } resPtr = Tcl_NewListObj(0, NULL); Tcl_ListObjAppendElement(NULL,resPtr,Tcl_NewStringObj(fsPtr->typeName,-1)); proc = fsPtr->filesystemPathTypeProc; if (proc != NULL) { Tcl_Obj *typePtr = (*proc)(pathPtr); if (typePtr != NULL) { Tcl_ListObjAppendElement(NULL, resPtr, typePtr); } } return resPtr; } /* *--------------------------------------------------------------------------- * * Tcl_FSPathSeparator -- * * This function returns the separator to be used for a given path. The * object returned should have a refCount of zero * * Results: * A Tcl object, with a refCount of zero. If the caller needs to retain a * reference to the object, it should call Tcl_IncrRefCount, and should * otherwise free the object. * * Side effects: * The path object may be converted to a path type. * *--------------------------------------------------------------------------- */ Tcl_Obj * Tcl_FSPathSeparator( Tcl_Obj *pathPtr) { const Tcl_Filesystem *fsPtr = Tcl_FSGetFileSystemForPath(pathPtr); if (fsPtr == NULL) { return NULL; } if (fsPtr->filesystemSeparatorProc != NULL) { return (*fsPtr->filesystemSeparatorProc)(pathPtr); } else { Tcl_Obj *resultObj; /* * Allow filesystems not to provide a filesystemSeparatorProc if they * wish to use the standard forward slash. */ TclNewLiteralStringObj(resultObj, "/"); return resultObj; } } /* *--------------------------------------------------------------------------- * * NativeFilesystemSeparator -- * * This function is part of the native filesystem support, and returns * the separator for the given path. * * Results: * String object containing the separator character. * * Side effects: * None. * *--------------------------------------------------------------------------- */ static Tcl_Obj * NativeFilesystemSeparator( Tcl_Obj *pathPtr) { const char *separator = NULL; /* lint */ switch (tclPlatform) { case TCL_PLATFORM_UNIX: separator = "/"; break; case TCL_PLATFORM_WINDOWS: separator = "\\"; break; } return Tcl_NewStringObj(separator,1); } /* Everything from here on is contained in this obsolete ifdef */ #ifdef USE_OBSOLETE_FS_HOOKS /* *---------------------------------------------------------------------- * * TclStatInsertProc -- * * Insert the passed function pointer at the head of the list of * functions which are used during a call to 'TclStat(...)'. The passed * function should behave exactly like 'TclStat' when called during that * time (see 'TclStat(...)' for more information). The function will be * added even if it already in the list. * * Results: * Normally TCL_OK; TCL_ERROR if memory for a new node in the list could * not be allocated. * * Side effects: * Memory allocated and modifies the link list for 'TclStat' functions. * *---------------------------------------------------------------------- */ int TclStatInsertProc( TclStatProc_ *proc) { int retVal = TCL_ERROR; if (proc != NULL) { StatProc *newStatProcPtr; newStatProcPtr = (StatProc *)ckalloc(sizeof(StatProc)); if (newStatProcPtr != NULL) { newStatProcPtr->proc = proc; Tcl_MutexLock(&obsoleteFsHookMutex); newStatProcPtr->nextPtr = statProcList; statProcList = newStatProcPtr; Tcl_MutexUnlock(&obsoleteFsHookMutex); retVal = TCL_OK; } } return retVal; } /* *---------------------------------------------------------------------- * * TclStatDeleteProc -- * * Removed the passed function pointer from the list of 'TclStat' * functions. Ensures that the built-in stat function is not removable. * * Results: * TCL_OK if the function pointer was successfully removed, TCL_ERROR * otherwise. * * Side effects: * Memory is deallocated and the respective list updated. * *---------------------------------------------------------------------- */ int TclStatDeleteProc( TclStatProc_ *proc) { int retVal = TCL_ERROR; StatProc *tmpStatProcPtr; StatProc *prevStatProcPtr = NULL; Tcl_MutexLock(&obsoleteFsHookMutex); tmpStatProcPtr = statProcList; /* * Traverse the 'statProcList' looking for the particular node whose * 'proc' member matches 'proc' and remove that one from the list. Ensure * that the "default" node cannot be removed. */ while ((retVal == TCL_ERROR) && (tmpStatProcPtr != NULL)) { if (tmpStatProcPtr->proc == proc) { if (prevStatProcPtr == NULL) { statProcList = tmpStatProcPtr->nextPtr; } else { prevStatProcPtr->nextPtr = tmpStatProcPtr->nextPtr; } ckfree((char *)tmpStatProcPtr); retVal = TCL_OK; } else { prevStatProcPtr = tmpStatProcPtr; tmpStatProcPtr = tmpStatProcPtr->nextPtr; } } Tcl_MutexUnlock(&obsoleteFsHookMutex); return retVal; } /* *---------------------------------------------------------------------- * * TclAccessInsertProc -- * * Insert the passed function pointer at the head of the list of * functions which are used during a call to 'TclAccess(...)'. The passed * function should behave exactly like 'TclAccess' when called during * that time (see 'TclAccess(...)' for more information). The function * will be added even if it already in the list. * * Results: * Normally TCL_OK; TCL_ERROR if memory for a new node in the list could * not be allocated. * * Side effects: * Memory allocated and modifies the link list for 'TclAccess' functions. * *---------------------------------------------------------------------- */ int TclAccessInsertProc( TclAccessProc_ *proc) { int retVal = TCL_ERROR; if (proc != NULL) { AccessProc *newAccessProcPtr; newAccessProcPtr = (AccessProc *)ckalloc(sizeof(AccessProc)); if (newAccessProcPtr != NULL) { newAccessProcPtr->proc = proc; Tcl_MutexLock(&obsoleteFsHookMutex); newAccessProcPtr->nextPtr = accessProcList; accessProcList = newAccessProcPtr; Tcl_MutexUnlock(&obsoleteFsHookMutex); retVal = TCL_OK; } } return retVal; } /* *---------------------------------------------------------------------- * * TclAccessDeleteProc -- * * Removed the passed function pointer from the list of 'TclAccess' * functions. Ensures that the built-in access function is not removable. * * Results: * TCL_OK if the function pointer was successfully removed, TCL_ERROR * otherwise. * * Side effects: * Memory is deallocated and the respective list updated. * *---------------------------------------------------------------------- */ int TclAccessDeleteProc( TclAccessProc_ *proc) { int retVal = TCL_ERROR; AccessProc *tmpAccessProcPtr; AccessProc *prevAccessProcPtr = NULL; /* * Traverse the 'accessProcList' looking for the particular node whose * 'proc' member matches 'proc' and remove that one from the list. Ensure * that the "default" node cannot be removed. */ Tcl_MutexLock(&obsoleteFsHookMutex); tmpAccessProcPtr = accessProcList; while ((retVal == TCL_ERROR) && (tmpAccessProcPtr != NULL)) { if (tmpAccessProcPtr->proc == proc) { if (prevAccessProcPtr == NULL) { accessProcList = tmpAccessProcPtr->nextPtr; } else { prevAccessProcPtr->nextPtr = tmpAccessProcPtr->nextPtr; } ckfree((char *)tmpAccessProcPtr); retVal = TCL_OK; } else { prevAccessProcPtr = tmpAccessProcPtr; tmpAccessProcPtr = tmpAccessProcPtr->nextPtr; } } Tcl_MutexUnlock(&obsoleteFsHookMutex); return retVal; } /* *---------------------------------------------------------------------- * * TclOpenFileChannelInsertProc -- * * Insert the passed function pointer at the head of the list of * functions which are used during a call to 'Tcl_OpenFileChannel(...)'. * The passed function should behave exactly like 'Tcl_OpenFileChannel' * when called during that time (see 'Tcl_OpenFileChannel(...)' for more * information). The function will be added even if it already in the * list. * * Results: * Normally TCL_OK; TCL_ERROR if memory for a new node in the list could * not be allocated. * * Side effects: * Memory allocated and modifies the link list for 'Tcl_OpenFileChannel' * functions. * *---------------------------------------------------------------------- */ int TclOpenFileChannelInsertProc( TclOpenFileChannelProc_ *proc) { int retVal = TCL_ERROR; if (proc != NULL) { OpenFileChannelProc *newOpenFileChannelProcPtr; newOpenFileChannelProcPtr = (OpenFileChannelProc *) ckalloc(sizeof(OpenFileChannelProc)); newOpenFileChannelProcPtr->proc = proc; Tcl_MutexLock(&obsoleteFsHookMutex); newOpenFileChannelProcPtr->nextPtr = openFileChannelProcList; openFileChannelProcList = newOpenFileChannelProcPtr; Tcl_MutexUnlock(&obsoleteFsHookMutex); retVal = TCL_OK; } return retVal; } /* *---------------------------------------------------------------------- * * TclOpenFileChannelDeleteProc -- * * Removed the passed function pointer from the list of * 'Tcl_OpenFileChannel' functions. Ensures that the built-in open file * channel function is not removable. * * Results: * TCL_OK if the function pointer was successfully removed, TCL_ERROR * otherwise. * * Side effects: * Memory is deallocated and the respective list updated. * *---------------------------------------------------------------------- */ int TclOpenFileChannelDeleteProc( TclOpenFileChannelProc_ *proc) { int retVal = TCL_ERROR; OpenFileChannelProc *tmpOpenFileChannelProcPtr = openFileChannelProcList; OpenFileChannelProc *prevOpenFileChannelProcPtr = NULL; /* * Traverse the 'openFileChannelProcList' looking for the particular node * whose 'proc' member matches 'proc' and remove that one from the list. */ Tcl_MutexLock(&obsoleteFsHookMutex); tmpOpenFileChannelProcPtr = openFileChannelProcList; while ((retVal == TCL_ERROR) && (tmpOpenFileChannelProcPtr != NULL)) { if (tmpOpenFileChannelProcPtr->proc == proc) { if (prevOpenFileChannelProcPtr == NULL) { openFileChannelProcList = tmpOpenFileChannelProcPtr->nextPtr; } else { prevOpenFileChannelProcPtr->nextPtr = tmpOpenFileChannelProcPtr->nextPtr; } ckfree((char *) tmpOpenFileChannelProcPtr); retVal = TCL_OK; } else { prevOpenFileChannelProcPtr = tmpOpenFileChannelProcPtr; tmpOpenFileChannelProcPtr = tmpOpenFileChannelProcPtr->nextPtr; } } Tcl_MutexUnlock(&obsoleteFsHookMutex); return retVal; } #endif /* USE_OBSOLETE_FS_HOOKS */ /* * Local Variables: * mode: c * c-basic-offset: 4 * fill-column: 78 * End: */